MG ZS Manual page 90

AIR CONDITIONING AND AUDIO SYSTEMS
Preset Tuning
The memory has 24 preset positions (FM1, FM2, FMA and
AM) for storing stations. Press the numeric button 1～6
to automatically select a station frequency stored.
Storing a Station
The system can provide 2 storing modes: manual storing
and auto storing.
Manual Storing
• Press [SRC] button to select the desired waveband.
• Use auto search, manual search or preset search to
select the desired station.
• Long press (more than 2s) any preset button to store
the current station frequency into the preset memory
(the screen displays the station waveband and frequency
stored).
Note: If there is a station already stored in the
memory, it will be overwritten by the newly stored
station.
Auto Storing
74
In the desired waveband, long press [SRC] button, the 6
strongest FM/AM station frequencies will be stored in the
memory of FMA or AM in order of signal strength. If the
auto-store is unable to find 6 strong stations, the stations
previously stored in the memory positions will be retained
and not be overwritten.
When [AST] appears in the display, it indicates that
received stations are being stored automatically.
Note: The auto-store will overwrite all stations already
stored by the FMA or AM preset button.
Scanning for a Station
In FM or AM mode, long press the [MENU] to search for
stations automatically. When a station signal is located, the
unit will stop searching and play the current station for 10s,
and the frequency will flash 10 times in the display. If you
want to stick to the current station, long press the [MENU]
button again. If not, the unit will search for the next station
automatically after 10s's playback.