Lights And Switches; Master Lighting Switch - MG ZS Manual

INSTRUMENTS AND CONTROLS

Lights and Switches

Master Lighting Switch

3
2
1
4
1 AUTO Lamp
2 Side/Tail Lamps and Switch Illumination
3 Dipped Headlamps
4 Lights OFF
32
AUTO Lamp
When the ignition is in the ACC position, the auto lighting
system is defaulted to the ON position (1). The auto
lighting system will automatically switch the side/tail lamps
and switch illumination on and off according to the intensity
of current ambient light.
With the ignition switched to ON position, the auto
lighting system is defaulted to the ON position (1).The
auto lighting system will automatically switch the side/tail
lamps, switch illumination and dipped headlamps on and
off according to the intensity of current ambient light.
Note: This function is realized by fitting a sensor
capable of monitoring exterior lighting conditions
in real time on your vehicle. The sensor is fitted in
the centre of the fascia panel near the windscreen.
DO NOT mask or cover this area, or headlamps may
automatically go on when not necessary.
Side/Tail Lamps and Switch Illumination
Turn the master lighting switch to position 2 to operate the
side/tail lamps and switch illumination. With the ignition