MG ZR Series Owner's Manual
  1. Manuals
  2. Brands
  3. MG Manuals
  4. Automobile
  5. ZR Series
  6. Owner's manual

MG ZR Series Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1
Before you Drive
1
2
Driving Controls
2
3
Audio System
3
4
Maintenance
4
5
Emergency Information
5
6
Technical Data
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZR Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MG ZR Series

Summary of Contents for MG ZR Series

  • Page 1 Before you Drive Driving Controls Audio System Maintenance Emergency Information Technical Data...

  • Page 2: Symbols Used

    © MG Rover Group Limited 2003 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form, electronic, mechanical, recording or other means without prior written permission from MG Rover Group Limited.

  • Page 3: Security Card

    Introduction SECURITY CARD IN AN EMERGENCY The security card contains important emergency information. It is ESSENTIAL that you keep the card safe from theft and ensure that IMPORTANT it is passed to the new owner if you sell the car. Remember the breakdown safety code •...

  • Page 5: Before You Drive

    Before you Drive 6 Controls 7 Locks & Alarm 17 Seats 20 Seat Belts 24 Child Restraints 26 Airbag SRS 29 Steering Column 30 Mirrors 32 Windows 34 Sunroof 35 Heating & Ventilation 41 Interior Equipment 46 In-Car Telephones 47 Load Carrying 52 Towing...
  • Page 6 Controls Before you Drive Controls 1. Headlight beam height control 2. Lighting and direction indicators controls 3. Instrument panel 4. Wiper/washer controls 5. Rear screen demister switch 6. Air conditioning switch 7. Hazard warning light switch 8. Front fog light switch 9.

  • Page 7: Locks And Alarm

    Check that the key number has been entered in the space provided on your Security Information card. If the key or handset is lost, contact an MG Rover dealer, who can supply replacement or additional keys and handsets.

  • Page 8: Locking The Car And Arming The Alarm

    Locks & Alarm LOCKING THE CAR AND ARMING THE ALARM Models with central door locking Before locking the car, ensure doors, windows, sunroof, bonnet Using the remote handset and tailgate are fully closed. Locking with the remote handset: 1. Press the lock button once: •...
  • Page 9 Locks & Alarm Superlocking with the remote handset: Unlocking with the remote handset: • Press the unlock (plain) button once. This will disarm the 1. Press the lock button twice within one second: • in addition to the features listed above, the door sill alarm, unlock the doors and remobilise the engine.
  • Page 10 Locks & Alarm Models without central door locking Mislock If the direction indicator lights fail to flash when the alarm system Locking the car and arming the alarm: is armed, this indicates that a door or other aperture is not fully 1.
  • Page 11 Locks & Alarm If the alarm is triggered Interior space protection The alarm, once activated, will be triggered by any one of the Never activate interior space protection if passengers or following actions: animals are to be left inside the car - any movement will •...

  • Page 12: Luggage Compartment

    Locks & Alarm LUGGAGE COMPARTMENT To lock, close the tailgate and turn the key in the lock anti- clockwise. Press the padlock button on the handset to re-arm the Do not drive with the tailgate open as poisonous exhaust gases alarm (if required).

  • Page 13: Engine Immobilisation

    Locks & Alarm ENGINE IMMOBILISATION Warning bleep Engine immobilisation is an important aspect of the car's security If the starter switch is turned and the engine fails to re-mobilise, a system, that occurs automatically whenever the alarm is armed. warning beeper will sound. To re-mobilise the engine, press the plain button on the remote handset.
  • Page 14 Locks & Alarm ENGINE IMMOBILISATION OVERRIDE 2. Turn the key to the LOCK position the number of times (Emergency key access code) indicated by the second digit of the code. Remember, the key If the handset is lost or fails to operate, the engine can be must be FULLY returned to the centre position after each turn of remobilised by using the starter key in the driver’s door lock to the key.
  • Page 15 Locks & Alarm During the 5 minute delay, the starter key may be turned to positions ‘I’ or ‘II’ and the relevant electrical systems can be operated (in starter position ‘II’ the immobilisation warning buzzer will sound). After the 5 minute time delay elapses, a period of 10 minutes commences, during which the engine must be started.

  • Page 16: Remote Handset

    45 seconds. If the handset fails to arm or disarm the alarm, this may be because It is recommended that you fit an MG Rover YWK 10003 or a the coded signal transmitted by the handset, is no longer Panasonic CR2032 replacement battery.

  • Page 17: Correct Seating Position

    Seats Seats CORRECT SEATING POSITION HEAD RESTRAINTS To avoid the risk of loss of control and personal injury, DO NOT Adjust the head restraint so that the cushion is level with the adjust the seats while the car is moving. back of the head - NOT THE NECK! The driver and front passenger seats should be positioned as far rearward as practical.

  • Page 18: Front Seat Adjustment

    Seats FRONT SEAT ADJUSTMENT 1. Forward/rearward adjustment Lift the lever to slide the seat forward or back. Ensure that the seat is locked in position before driving. 2. Height adjustment (Driver's seat only) Rotate the handle to raise or lower the seat cushion. 3.
  • Page 19 Seats REAR SEAT ACCESS LEVER (3 door models only) REAR SEATS (Saloon models only) For information on folding the rear seats, refer to ‘FOLDING THE REAR SEATS (Saloon models only)’, page 49. HB0239 Lift the lever to fold the backrest forward to gain access to the rear seats.

  • Page 20: Seat Belt Safety

    Seat Belts • In most countries, all occupants are required by law to wear a seat Seat Belts SEAT BELT SAFETY belt, unless they have been issued with a medical exemption The seat belts fitted to your vehicle are intended for use by adult sized certificate.
  • Page 21 Seat Belts SEAT BELTS Releasing the belt Press the red button on the seat belt buckle. Ensure that all seat belts are worn correctly - an improperly worn seat belt increases the risk of death or serious injury in the Adjusting the upper anchorage (front seat belts only) event of a collision.

  • Page 22: Seat Belt Pretensioners

    SRS warning light’, page 28). NOTE: After any impact, always have the seat belts and pre-tensioners checked and, if necessary, replaced by an MG Rover dealer. If the pre-tensioners have been activated, the seat belts will still function as restraints, and must be worn in the event that the...

  • Page 23: Caring For Seat Belts

    Seat Belts CARING FOR SEAT BELTS Always replace a seat belt assembly where the webbing shows signs of fraying. Regularly inspect the belt webbing for signs of fraying, cuts and wear; also pay particular attention to the condition of the fixing points and adjusters.

  • Page 24: Child Restraints

    13 kg (or approximately 18 months of age) are against the use of a REAR FACING child seat in the front restrained in an MG Rover - approved rear facing child seat in an passenger seat if a passenger airbag is fitted.
  • Page 25 Child Restraints Child restraint seating options Mass Group Seating Positions Recommended Child Restraints (L) Front Passenger Rear Outboard Rear Centre (As indicated on child safety seat packaging) 0 = Up to 10 kg (0 - 9 months) Britax Babysure Britax Rock-a-tot 0+ = Up to 13 kg (0 - 18 months) Britax Babysure Britax Rock-a-tot...

  • Page 26: Airbag Srs

    Airbag SRS Airbag SRS AIRBAG SUPPLEMENTARY RESTRAINT SYSTEM To ensure correct deployment of the airbags, it is essential that (SRS) obstructions are not allowed to intervene between an airbag and the occupant. The airbag SRS provides ADDITIONAL protection in a Do not allow a front seat passenger to obstruct the operation of severe impact only.
  • Page 27 Airbag SRS HOW THE AIRBAG SRS OPERATES In the event of a collision, the airbag control unit monitors the rate of deceleration or acceleration induced by the collision, to determine whether the airbag(s) should be deployed. Operation of the airbag SRS is dependent entirely on the rate at which the car's passenger compartment changes speed as a result of a collision.

  • Page 28: Service Information

    ALWAYS seek to any malfunction of the airbag SRS and seat belt pre-tensioners. the assistance of an MG Rover dealer to carry out any of the The light will illuminate as a bulb and system check when the following: •...

  • Page 29: Steering Column Adjustment

    Steering Column Steering Column STEERING COLUMN ADJUSTMENT DO NOT attempt to adjust the steering wheel while the car is in motion. This is extremely dangerous! HB0209a The angle of the steering column can be adjusted to suit your driving position: 1.

  • Page 30: Exterior Mirrors

    Mirrors Mirrors EXTERIOR MIRRORS Heating elements Electrically controlled exterior mirrors have automatic, integral NOTE: Objects viewed in exterior mirrors may appear further away than heating elements for dispersing ice and mist. they actually are. Manual operation Electrical operation H3116 Manually operated mirrors are adjusted by moving the lever as shown in the illustration.

  • Page 31: Interior Rearview Mirror

    Mirrors Mirror folding INTERIOR REAR VIEW MIRROR The interior mirror can be dipped to reduce glare from following vehicles. At night, move the lever at the base of the mirror forward to ‘dip’ the mirror. Normal visibility is restored, by pulling the lever back to its original position.

  • Page 32: Power-Operated Window Controls

    Windows Windows POWER-OPERATED WINDOW CONTROLS Operating the windows The electric windows can only be operated when the starter switch is at position ‘II’ and for up to 30 seconds after the starter switch is turned off (provided a door is not opened in the meantime). Push the switch forward to lower, and pull the switch to the rear to raise the window.
  • Page 33 Windows Rear window isolation switch REAR VENTILATOR WINDOWS (3-door saloon models only) HB0245a The isolation switch on the fascia (see illustration), controls power to the passenger window switches. When carrying children, isolate the passenger window switches by HB0076 pressing the isolation switch. This will prevent any possibility of injury through accidental opening and closing of the windows.

  • Page 34: Sunroof Operation

    Sunroof Sunroof SUNROOF OPERATION* Tilting the rear edge To raise the rear edge of the roof; with the sunroof closed, push the switch forward. To return the tilted roof to the closed position, pull the switch rearward. Opening and closing Pull the switch to the rear to open, push forward to close.

  • Page 35: Heating And Ventilation

    Heating & Ventilation Heating & Ventilation VENTILATION Centre face level vents HB0079 Rotate the thumbwheel up to open, or down to close the vents. Direct the air flow by moving the control in the centre of the louvres up and down, or from side to side. Use the air flow lever to open or close the heater bypass.
  • Page 36 Heating & Ventilation Side face level vents HEATING Rotate the thumbwheel up to open, or down to close the vents. Direct the air flow by moving the control in the centre of the louvres, either up or down, or from side to side. HB0624 1.
  • Page 37 Heating & Ventilation 2. Air temperature control 6. Rear screen demister • BLUE: Unheated air Press to operate; the indicator light in the switch illuminates • RED: Heated air whenever the demister is on and extinguishes when the 3. Blower switch demister is turned off.

  • Page 38: Using Your Heater

    Heating & Ventilation USING YOUR HEATER Maximum ventilation Fresh air enters the heater through the air intake grille in front of the windscreen and is extracted through vents at the rear of the car. The air intake grille must always be kept clear of obstructions, including leaves, snow and ice.

  • Page 39: Air Conditioning

    Heating & Ventilation AIR CONDITIONING* Maintaining the air conditioning The air conditioning system is sealed and major maintenance The air conditioner provides additional cooling and also reduces should only be carried out by a qualified technician. To maintain moisture from the air. the system in peak condition however, owners should ensure that Using the air conditioning the system is operated for a short period every week (even during...
  • Page 40 Heating & Ventilation Rapid cooling Reducing humidity HB0626 HB0625 Start the engine and switch on the air conditioning. Air conditioning reduces moisture from the air and can be used to demist windows quickly in damp weather. Used in conjunction Set the blower to maximum speed and switch on air recirculation with the heater, it also makes the interior of the car warm and dry.

  • Page 41: Interior Equipment

    Interior Equipment Interior Equipment INTERIOR LIGHT SUN VISOR HB0252 To shield your eyes from the sun, pull the visor down from the roof lining; the visor can be used to shield the upper part of the windscreen, or the side window, as required. Switch positions: 1.

  • Page 42: Cigar Lighter

    Interior Equipment CLOCK CIGAR LIGHTER* ONLY hold the cigar lighter by the handle. HB0642 The digital clock display illuminates when the starter switch is turned on and dims for night viewing when the sidelights are switched on. Press the hour (‘H’) and minute (‘M’) buttons to set the time. If both buttons are pressed together, the display will change between HB0080 24 hour and 12 hour displays.
  • Page 43 Interior Equipment ASHTRAYS Rear ashtray Ashtrays are fire hazards - DO NOT use for waste paper or other combustible materials. Front ashtray HB0081 R3H0040a Lift the lid to open. To remove for emptying, lift the lid and Pull the front of the ashtray to open. To remove for emptying, carefully pull the body of the ashtray upwards.

  • Page 44: Auxiliary Power Socket

    HB0631 Pull to remove the power socket cover. The power socket can be used to power MG Rover-approved accessories that use a A drinks holder, designed to carry drinks cans, is provided in each maximum of 180 watts. Always run the engine during prolonged of the front door stowage bins.
  • Page 45 Interior Equipment COMPACT DISC STORAGE HB0670 A storage compartment for compact discs is provided in each of the front door stowage bins.
  • Page 46 In-Car Telephones In-Car Telephones IN-CAR TELEPHONES Refrain from operating a telephone fitted with its own aerial inside the car (see main text). Your car uses a number of electronic systems designed to provide you with maximum comfort, safety and economy. These systems may be affected by the use of non-approved mobile communication equipment inside the car.

  • Page 47: Load Carrying

    Load Carrying Load Carrying REAR WINDOW SHELF (Saloon models only) The rear window shelf can be removed, to increase the height of the luggage area, as follows: • Release the lifting straps. Then, with the shelf horizontal, hold the front edge and pull smartly to the rear to disengage the shelf from the retaining clips on each side.
  • Page 48 Load Carrying COLLAPSABLE STORAGE BOX* The box is located in the loadspace and can be used to store loose items, to prevent them from becoming projectiles in the event of an accident or emergency manoeuvre. The box can also be used to stow items such as dirty boots, to protect the car interior from damage.
  • Page 49 Load Carrying FOLDING THE REAR SEATS (Saloon models only) HB0600 3. Lift the front of the box and secure the velcro fastenings. The box is now ready for use. HB0253 The backrest is divided into two parts; either, or both of which, can be folded forward to increase the luggage space.

  • Page 50: Roof Racks

    To ensure absolute safety, only fit accessories that have been Ensure that the rear seat backrests are securely latched in the designed and tested for your car. Your MG Rover dealer will upright position when the seat is in use and when loads are provide details of approved tow bars and roof racks.
  • Page 51 Load Carrying SAFETY PRECAUTIONS (Van models only) Lashing rings In the event of an accident or emergency manoeuvre, an unsecured load may cause personal injury to the occupants, or adversely affect the stability of the vehicle. Secure loads to the loadspace floor at all times.
  • Page 52 Rover, otherwise serious damage to the car may result. To ensure absolute safety, only fit accessories that have been designed and tested for your car. Your MG Rover dealer will provide details of approved tow bars. The permissible maximum towing weight, the maximum rear axle weight and towing hitch downward load and the maximum towing hitch overhang, are given in ‘Technical Data’.

  • Page 53: Towing A Trailer

    Towing • For maximum stability, ensure that trailer loads are properly TOWING A TRAILER secured and unable to shift position during transit. Also, NOTE: Towing regulations vary from country to country. It is very position loads so that most of the weight is placed close to the important to ensure that national regulations governing towing weights and floor and, where possible, immediately above or close to the speed limits are observed (refer to the relevant national motoring...

  • Page 55: Driving Controls

    Driving Controls 56 Instruments 58 Warning Lights 61 Starting & Driving 65 Catalytic Converter 66 Environmental Driving 68 Manual Gearbox 69 Automatic Transmission 73 Fuel System 77 Lights & Indicators 79 Wipers & Washers 81 Fascia Switches 82 Brakes 86 Parking Aid...

  • Page 56: Instrument Panel

    Instruments Driving Controls 2. Tachometer Instruments INSTRUMENT PANEL Indicates engine speed in revolutions per minute. To protect the engine from damage, NEVER allow the tachometer pointer to enter the RED sector. Note that the range of the red sector will vary according to engine type.
  • Page 57 Instruments 5. Trip recorder reset button Whenever the starter switch is turned on, the display shows the odometer reading. By pressing the trip recorder reset button briefly, the display will change to show the trip recorder reading (a further press of the button returns the display to the odometer reading).

  • Page 58: Warning Lights

    Warning Lights Warning Lights WARNING LIGHT POSITION AND OPERATION Direction indicators - GREEN The left or right warning light flashes in time with the left or right direction indicator lights, whenever they are operated. If either warning light fails to illuminate, or flashes very rapidly, this means that one of the indicator lights is not operating.
  • Page 59 Warning Lights Transmission fault - AMBER (Auto gearbox cars only) Luggage compartment open - RED If the light illuminates while driving, a fault with the Illuminates if the tailgate is open. DO NOT drive the car automatic gearbox is indicated. In this eventuality, with the light illuminated - poisonous exhaust fumes will reduced performance will be evident and engine speeds will be enter the car.
  • Page 60 Warning Lights Battery charging - RED The light illuminates as a bulb check when the starter switch is turned to position ‘II’ and extinguishes as soon as the engine is running. If it remains on, or illuminates whilst driving, a fault with the battery charging system is indicated. Seek qualified assistance urgently.

  • Page 61: Starting And Driving

    Starting & Driving Starting & Driving STARTER SWITCH ‘II’ - Electrical circuits on With the switch in position ‘II’, all instruments, lights and DO NOT remove the key or turn the starter switch to position electrical circuits are operational. ‘0’, while the car is in motion. This will cause the steering lock to engage and make it impossible to steer the car.

  • Page 62: Petrol Models

    Starting & Driving PETROL MODELS What to do if the engine fails to start, or starts but will not continue running: Never start or leave the engine running in an unventilated • Press the accelerator pedal half way down while operating the building - exhaust gases are poisonous and contain carbon starter.

  • Page 63: Diesel Models

    Starting & Driving DIESEL MODELS In temperate climates, DO NOT operate the starter for longer than 10 seconds; if the engine fails to start, switch off and wait for Never start, or leave the engine running, in an unventilated 10 seconds before re-using the starter. building - exhaust gases are poisonous and contain carbon monoxide, which can cause unconsciousness and may even be fatal.

  • Page 64: All Models

    Starting & Driving ALL MODELS RUNNING-IN Warming up The engine, gearbox, brakes and tyres need time to ‘bed-in’ and In the interest of fuel economy, it is advisable to drive the car soon adjust to the demands of everyday motoring. During the first after starting.

  • Page 65: Catalytic Converter

    Catalytic Converter Catalytic Converter CATALYTIC CONVERTER Fuel • Use ONLY fuel recommended for your car. Exhaust temperatures can be extremely high; do not park on • Never allow the car to run out of fuel - this could cause a ground where combustible materials such as dry grass or leaves misfire which could damage the catalyst.

  • Page 66: Protecting The Environment

    Steady, rather than rapid, acceleration uses considerably less reduce pollution than the motor industry. MG Rover is no fuel, reduces exhaust pollutants and also minimises the wear to exception. Your car has been designed with the latest technology mechanical components.
  • Page 67 Environmental Driving Maintenance • Have the car regularly serviced Regular servicing from a qualified technician will ensure optimum fuel economy and minimise exhaust pollutants, as well as effectively extending the service life of the car. • Check the tyre pressures regularly Under-inflated tyres increase the rolling resistance of the car which, in turn, increases fuel consumption.

  • Page 68: Manual Gearbox

    Manual Gearbox Manual Gearbox GEAR LEVER Precautions while driving • Do not rest your hand on the gear lever while driving - pressure from your hand may cause premature wear to the gear selector mechanism. • Do not rest your foot on the clutch pedal when driving - excessive wear to the clutch will result.

  • Page 69: Automatic Transmission

    Automatic Transmission Automatic Transmission STEPSPEED CONTINUOUSLY VARIABLE GEAR SELECTOR TRANSMISSION* The ‘Stepspeed’ transmission system provides both automatic and manual operation of the gears. By default the transmission is naturally in automatic mode. With the engine started, selection of ‘R’ (Reverse), ‘N’ (Neutral) or ‘D’ (Drive) can be made by moving the selector lever backward or forward in a similar manner to any other automatic gearbox.
  • Page 70 Automatic Transmission Selector lever positions Sport mode In Sport mode the CVT characteristics of the gearbox are retained, DO NOT select 'P' (Park) or 'R' (Reverse) if the car is with full automatic progression through the gear ratios. By moving. selecting Sport mode, however, the power transmitted to the road •...
  • Page 71 Automatic Transmission • To deselect manual mode, simply move the selector lever MANUAL GEAR SELECTION* sideways back to the ‘D’ position. Automatic gear changing will then resume. NOTE: The Stepspeed system is able to protect the transmission from damage by disallowing gear changes that are potentially injurious to the power unit and, similarly, by preventing gear changes that may be dangerous (e.g.
  • Page 72 Automatic Transmission USING THE AUTOMATIC GEARBOX * During this delay, the engine should be allowed to idle The following information is particularly important for driver's WITHOUT any operation of the throttle; pressing the accelerator who are unfamiliar with the techniques required to drive cars with pedal before the gears have engaged will cause an uncomfortable automatic transmission.

  • Page 73: Fuel System

    If in doubt, consult an MG Rover dealer for advice. Always take care when refuelling: The RON value quoted is a MINIMUM requirement for the •...

  • Page 74: Fuel Filler

    Fuel System FUEL FILLER FUEL FILLING Use only the recommended fuel! Serious damage to the catalytic converter will occur if the wrong fuel is used. Always fill the tank SLOWLY, until the filler nozzle automatically cuts-off the fuel supply. DO NOT attempt to fill the tank beyond this point, or spillage could result due to expansion of the fuel.

  • Page 75: Empty Fuel Tank

    Fuel System Filling difficulties Diesel engine The fuel delivery rate of filling station pumps, can vary significantly from one garage forecourt to another. This, coupled with the fact that modern pumps are equipped with a sensor which automatically cuts off the supply as soon as turbulence is detected in the upper part of the car's filler neck, could result in isolated fuel filling problems.
  • Page 76 Fuel System FUEL CUT-OFF SWITCH (Petrol engine models only) The switch is located on the right hand side of the engine compartment, mounted on the bulkhead. After the switch has ALWAYS check for fuel leaks before resetting the fuel cut-off been activated, it must be reset by pressing the rubber top (arrowed switch.

  • Page 77: Lighting Switch

    Lights & Indicators Lights & Indicators LIGHTING SWITCH Direction indicators Side and headlights HB0093 HB0622 Turn the control to the first position to illuminate the side, tail and instrument panel lights. Turn the control to the second position to Move the lever down to indicate a LEFT turn, or up to indicate a illuminate the headlights.
  • Page 78 Lights & Indicators HEADLIGHT BEAM HEIGHT CONTROL Using the following load conditions as a guide, adjust the height of the headlight beams by moving the control (arrowed in inset). Saloon settings • Position ‘0’ Driver, or driver and front seat passenger only (no luggage). •...

  • Page 79: Wipers And Washers

    Wipers & Washers Wipers & Washers WIPER CONTROLS Single wipe Pull the lever down and release immediately. NOTE: With the lever held down, the wipers will operate at high speed until it is released. Windscreen washer Pull the lever towards the steering wheel. The windscreen washers will operate for as long as the lever is held in this position.
  • Page 80 Wipers & Washers Rear window wash/wipe Rotate the switch clockwise to the first position to operate the rear wiper. After wiping continuously four times, the wiper continues intermittently until switched off. Rotate the switch further clockwise, to the second position, to operate the rear screen washer AND wiper.

  • Page 81: Fascia Switches

    Fascia Switches Fascia Switches Fascia Switches Front fog lights Press to operate; the indicator light in the switch Fog lights should ONLY be used when visibility is severely illuminates when the fog lights are on and extinguishes restricted - other road users could be dazzled in clear when they are switched off.

  • Page 82: Foot Brake

    Brakes Brakes FOOT BRAKE Brake system warning light The light illuminates when the handbrake is applied and The hydraulic braking system operates through dual circuits; extinguishes when it is fully released. If the warning if one circuit should fail, the other will continue to function. light illuminates while driving, or fails to extinguish when the However, in the event of a brake failure where only one circuit is handbrake is fully released, a fault with the braking system is...
  • Page 83 Brakes Brake pads HANDBRAKE Brake pads require a period of bedding in. For the first 300 km, DO NOT drive with the handbrake applied, or apply the avoid situations where heavy braking is required. handbrake while the car is in motion; this could result in loss Remember that regular servicing is vital to ensure that all the brake of control, prevent the anti-lock braking system from functioning components are examined for wear at the correct intervals, and...

  • Page 84: Anti-Lock Brakes (Abs)

    Brakes ANTI-LOCK BRAKES (ABS) Electronic brake force distribution Your car is equipped with Electronic Brake force Distribution ABS cannot overcome the physical limitations of stopping the (EBD), which, in order to maintain braking efficiency, car in too short a distance, cornering at too high a speed, or the automatically proportions the distribution of braking forces danger of aquaplaning, i.e.
  • Page 85 Brakes Braking in an emergency ABS Warning light The ABS incorporates a monitoring system, which DO NOT pump the brake pedal at any time; this will checks that all the electrical components are in working interrupt operation of the ABS and may increase braking order as soon as the starter switch is turned on, and also at frequent distance.

  • Page 86: Parking Aid

    Parking Aid Parking Aid PARKING AID* Parking aid in operation With the starter switch turned to position ‘II’, the parking aid The parking aid is not infallible. It is for guidance only! The operates automatically whenever reverse gear is selected and is sensors may not be able to detect certain types of obstruction, switched off as soon as reverse is deselected.

  • Page 87: Audio System

    Audio System 88 Audio System Identification 89 Radio Reception 90 Remote Audio Controls 91 Radio 96 Cassette Player 98 Compact Disc Player 102 Radio Tuning 107 Traffic Information 108 Radio Data System 109 Clock & Time 110 Menu Functions 111 CD Changer 113 Security Code...
  • Page 88 Audio System Identification Audio System This section of the handbook covers only those audio systems Audio System Identification AUDIO SYSTEM SPECIFICATION fitted as standard to cars within the model range at the time of manufacture. If, at the time of ordering your car, you specified a different audio system, it will have been fitted by your dealer before you took delivery of your car.

  • Page 89: Radio Reception

    Radio Reception Radio Reception RADIO RECEPTION FM transmitters can only broadcast over a limited range and good, clear signals will only be received in the immediate area of the transmitter. When travelling, it may be necessary to re-tune the radio from time to time, to offset the effects of moving from one transmitter area to another.

  • Page 90: Remote Audio Controls

    Remote Audio Controls Remote Audio Controls REMOTE AUDIO CONTROLS* HB0212a Volume control Lift or press the switch to increase or decrease volume. VOL. Search/select control Lift or press the switch to search forwards or backwards through the frequency range.

  • Page 91: Detachable Control Panel

    Radio Radio DETACHABLE CONTROL PANEL Replacing the control panel Place the right side of the panel into position, then push the left- For added protection against theft, remove the control panel and hand side into the front of the audio unit until it clicks into place. take it with you when you leave the car.

  • Page 92: Sound Controls

    Radio SOUND CONTROLS 3. Audio selection control Use in conjunction with the controls (5) to adjust bass, treble, balance and fader levels. Note that different bass and treble levels can be set for each sound source (e.g. radio, tape or CD).
  • Page 93 Radio Fader: To adjust the balance between front and rear speakers: Muting the sound Briefly press the on/off button (1) (‘MUTE’ appears in the 1. Press the AUDIO control - (‘BASS’ shows in the display). display). The volume will instantly reduce to a preset level. The 2.
  • Page 94 Radio Output level display Illuminated bars flash in the display to provide a graphic indication of the sound control settings as they are adjusted. At other times, the display symbolises the radio’s output level. The output level display can be enabled or disabled as follows: 1.

  • Page 95: Radio Controls

    Radio RADIO CONTROLS 2. Tuning controls Briefly press either the controls. The unit automatically searches up or down the frequency range and tunes to the next receivable station (see ‘TUNING’, page 102). Radio frequencies can also be selected using the remote switches on the steering wheel (see ‘REMOTE AUDIO CONTROLS*’, page 90).

  • Page 96: Cassette Player

    Cassette Player Cassette Player CASSETTE PLAYER CONTROLS (CC32 only) 2. Fast forward/rewind/tape reverse During tape winding, ‘FORWARD’ or ‘REWIND’ shows in the display. • To forward or reverse wind, fully press either one of the two buttons. • To stop tape winding, half press the remaining (unlocked) button.
  • Page 97 Cassette Player CARE OF CASSETTE PLAYER AND TAPES Cassette tapes • Always store cassettes in their boxes when not in use. Use only good quality tapes with a maximum capacity of ninety • Never leave cassettes in the vehicle during extremes of minutes (C90).

  • Page 98: Compact Disc Player

    Compact Disc Player Compact Disc Player SINGLE PLAY CD CONTROLS (CD32 only) 2. Track selection/search Track Selection: Press one of the controls to select the next, or previous track. Press the control repeatedly to move forward or back through the tracks on the disc. Fast track selection: Press and hold either the control.
  • Page 99 Compact Disc Player 6. Track scanning Track scanning enables you to listen to the first few seconds of each track on the disc. Press and hold the MENU button (6) for two seconds (‘SCAN’ appears in the display). Press the MENU button again to stop the scan at your chosen track.
  • Page 100 Compact Disc Player MULTI-CD CHANGER CONTROLS* 2. Disc and track selection/search Disc selection: Briefly press the control to advance to the next disc, or the control to return to the start of the previous disc. Press the controls repeatedly to move forward or back through all the discs in the magazine.
  • Page 101 Compact Disc Player 5. Random play (MIX) Changing the display Press pre-set button 5 (MIX) to play the tracks on the current disc The information appearing in the display can be set to show either: in a random order (‘MIX CD’ is displayed briefly and the ‘MIX’ the track number and disc number (e.g ‘T07 D6’), or the track indicator illuminates).

  • Page 102: Radio Tuning

    Radio Tuning Radio Tuning TUNING Fast manual tuning: By keeping either of the tuning controls depressed, the waveband is scanned rapidly down or up until the control is released. Automatic tuning Select the required waveband, then briefly press the tuning control (3). The radio searches the frequency range (up or down depending MENU upon which tuning control was pressed) for a radio station of...
  • Page 103 Radio Tuning Waveband scan Waveband scanning enables you to listen to all receivable stations on the selected waveband for between 5 and 30 seconds each. To start scanning: Press the MENU button (4) for two seconds (‘SCAN’ is displayed briefly, followed by the frequency or station name flashing).
  • Page 104 Radio Tuning RADIO PRE-SET BUTTONS Operating the pre-sets Once the pre-set buttons have been programmed, select the desired waveband, then press the pre-set button of your choice. The display initially shows the pre-set number you have selected and the station frequency e.g: ‘P3 101.3’. This is followed by the waveband and station frequency (or station name).
  • Page 105 Radio Tuning TRAVELSTORE If Travelstore is unable to locate and store six stations, the display shows (‘-----’) for any unoccupied pre-sets, and the radio reverts to the last recalled pre-set frequency on the FMT waveband. NOTE: Travelstore overwrites any stations already stored on the FMT memory bank.

  • Page 106: Programme Type (Pty)

    Radio Tuning PROGRAMME TYPE (PTY) Selecting a programme type Some radio stations broadcasting on the FM waveband provide 1. With PTY switched on, repeatedly press one of the programme type (PTY) information that can be received by the controls, or briefly press a pre-set button until the desired radio tuner.

  • Page 107: Traffic Information

    Traffic Information Traffic Information TRAFFIC INFORMATION BROADCASTS A warning beep will sound if: • The car leaves the reception area of the traffic information station being received. • While listening to a tape or CD the car leaves the reception area of the traffic information station currently tuned and the subsequent automatic search cannot find a new traffic information station.

  • Page 108: Radio Data System (Rds)

    Radio Data System Radio Data System RADIO DATA SYSTEM (RDS) Receiving RDS stations Your radio is equipped with RDS (Radio Data System). RDS is With RDS active, whenever an RDS radio station is received, the being introduced in European countries and operates on the FM station name illuminates in the display.

  • Page 109: Clock & Time

    Clock & Time Clock & Time CLOCK Changing between 12 and 24 hour displays 1. Press the MENU button (1). 2. Press the control until ‘12H MODE’ or ‘24H MODE’ appears in the display. 3. Press the controls to switch between displays. 4.

  • Page 110: Menu Functions

    Menu Functions Menu Functions MENU CONTROL FUNCTIONS PTY LANG Select to change PTY language - press to select The following tables identify the full range of functions obtainable English, French or German. by pressing the menu button and then using the controls.

  • Page 111: Disc Changer

    Only insert the magazine (3) in the direction of the arrow marked on the magazine casing and push it fully into the changer. Finally, NOTE: Additional magazines can be obtained from an MG Rover close the cover. dealer.

  • Page 112: Caring For Compact Discs

    CD Changer CARING FOR CD CHANGERS CARING FOR COMPACT DISCS Dirt, dust, condensation and heat can damage discs. Always observe the following precautions: IMPORTANT NEVER touch the horizontal playing surface (the unlabelled side) • Use standard 12cm CDs only. of a disc! Handle discs by holding the outer edges, or the edge of •...

  • Page 113: Entering The Security Code

    • NEVER keep a record of the security code in the car. delay period commences. During the delay period, ‘WAIT 1 H’ appears • If you lose your code number, contact an MG Rover dealer, in the display - DO NOT switch off. At the end of the delay period, ‘CODE’...

  • Page 115: Maintenance

    Maintenance 116 Maintenance 119 Bonnet Opening 120 Engine Compartment 122 Engine 124 Cooling System 125 Brakes 126 Power Steering 127 Battery 130 Washers 131 Wipers 132 Tyres 135 Cleaning & Vehicle Care 138 Identification Numbers 140 Parts & Accessories...

  • Page 116: Routine Servicing

    Maintenance Maintenance EMISSION CONTROL Maintenance ROUTINE SERVICING Your car is fitted with emission and evaporative control equipment The safety, reliability and performance of your car will depend designed to meet specific territorial and legal requirements. You partly on how well it is maintained. should be aware that unauthorised replacement, modification or Maintenance is the owner's responsibility, and you must ensure tampering with this equipment by an owner or motor vehicle...

  • Page 117: Owner Maintenance

    Contact an MG Rover dealer for Any significant or sudden drop in fluid levels, or uneven tyre advice.

  • Page 118: Safety In The Garage

    Maintenance SAFETY IN THE GARAGE Poisonous fluids It is illegal to pollute drains, water courses or soil. Use authorised Cooling fans may commence operating up to 4 minutes after waste disposal sites to dispose of used oil and toxic chemicals. the engine is switched off, and continue operating for up to 8 minutes.

  • Page 119: Bonnet Opening

    Bonnet Opening Bonnet Opening BONNET OPENING 1. From inside the car, pull the bonnet release handle. 2. Move the bonnet safety catch lever to the left. DO NOT drive with the bonnet retained by the safety catch 3. Raise the bonnet and then fit the support stay into the cut- alone.

  • Page 120: Engine Compartment

    Engine Compartment Engine Compartment PETROL ENGINE 1. Power steering reservoir 2. Cooling system reservoir 3. Brake reservoir 4. Engine oil filler (yellow cap) 5. Engine oil dipstick (yellow) 6. Washer reservoir HB0262 While working in the engine compartment, always observe the safety precautions listed under ‘SAFETY IN THE GARAGE’, page 118.

  • Page 121: Diesel Engine

    Engine Compartment DIESEL ENGINE 1. Power steering reservoir 2. Cooling system reservoir 3. Brake reservoir 4. Engine oil filler (yellow cap) 5. Engine oil dipstick (yellow) 6. Washer reservoir HB0263 While working in the engine compartment, always observe the safety precautions listed under ‘SAFETY IN THE GARAGE’, page 118.
  • Page 122 Engine Engine ENGINE OIL LEVEL CHECK & TOP-UP Oil level check & top-up Take care to avoid spilling engine oil onto a hot engine - a fire Driving the car with the engine oil level ABOVE the upper may result! mark, or BELOW the lower mark on the dipstick, will damage the engine.
  • Page 123 Engine To top-up, remove the oil filler cap and add oil to maintain a level between the upper and lower marks on the dipstick. As a general guide, if the level on the dipstick is: • nearer to the upper mark than the lower, add no oil. •...

  • Page 124: Cooling System

    Cooling System Cooling System COOLANT CHECK & TOP-UP ANTI-FREEZE DO NOT remove the reservoir cap when the cooling system is Anti-freeze is poisonous and can be fatal if swallowed - keep hot - escaping steam or water could cause serious injury. containers sealed and out of the reach of children.

  • Page 125: Brake Fluid

    Brakes Brakes BRAKE FLUID Check & Top-up Brake fluid is highly toxic - keep containers sealed and out of the reach of children. If accidental consumption of brake fluid is suspected, seek medical attention immediately. Prevent brake fluid coming into contact with the skin or eyes. If this occurs, rinse immediately with plenty of water.

  • Page 126: Power Steering Fluid

    Power Steering Power Steering POWER STEERING FLUID Fluid specification Use any fluid to Dexron IID specification. Power steering fluid is highly toxic - keep containers sealed and NOTE: The colour of commercially available power steering fluids may out of the reach of children. If accidental consumption of fluid differ from that used to fill the system during manufacture.

  • Page 127: Battery Maintenance

    Battery Battery BATTERY MAINTENANCE Battery safety Batteries contain sulphuric acid, which is both corrosive and poisonous. If spillage occurs: • On clothing or the skin - remove any contaminated clothing immediately, flush the skin with large amounts of water, and seek medical attention urgently.
  • Page 128 Used batteries are hazardous to the environment, and should be with tools or metal parts of the car. recycled. If in doubt seek advice about disposal from an MG Rover To release the battery from the car, undo the bolt securing the dealer or your local authority.
  • Page 129 Battery • The battery will be charged sufficiently once the battery Battery charging condition indicator shows GREEN. When charging is finished, DO NOT charge the battery if it is connected to the car - this switch off the battery charger BEFORE disconnecting the leads may seriously damage the car's electrical system.

  • Page 130: Washer Jets

    Washers Washers WINDSCREEN WASHER TOP-UP Note that body panels may suffer discoloration as a result of screenwash spillage. Take care to avoid spillage, particularly if an Some screenwash products are inflammable, particularly if undiluted or high concentration of screenwash is being used. If high or undiluted concentrations are exposed to sparks.

  • Page 131: Wiper Blades

    Wipers Wipers WIPER BLADES Replacing wiper blades IMPORTANT • Grease, silicon and petrol based products impair the blade's wiping capability. Wash the wiper blades in warm soapy water and periodically check their condition. • If signs of hardness or cracking in the rubber are found, or if the wipers leave streaks or unwiped areas on the screen, then the wiper blades should be replaced.

  • Page 132: Caring For Your Tyres

    Tyres Tyres CARING FOR YOUR TYRES Tyre pressures Correctly inflated tyres will ensure that you enjoy the best DEFECTIVE TYRES ARE DANGEROUS! Do not drive combination of tyre life, ride comfort, fuel economy and road if any tyre is damaged, is excessively worn, or is inflated to an handling.
  • Page 133 Replacement tyres DO NOT replace wheels with any type other than genuine MG Rover parts. Alternative wheels, which do not meet HB0067 original equipment specifications may adversely affect the car's driving characteristics and should not be fitted.

  • Page 134: Snow Chains

    Unsuitable snow chains could damage the tyres, wheels, suspension, brakes or bodywork of your car. Only fit chains that have been recommended by an MG Rover dealer and approved by MG Rover for use on your car. In use, always observe the following precautions: •...

  • Page 135: Cleaning & Vehicle Care

    Cleaning & Vehicle Care Cleaning & Vehicle Care WASHING YOUR CAR After washing, rinse the bodywork with clean water and dry off with a chamois leather. Some high pressure cleaning systems will penetrate door, window and sunroof seals, and damage lock mechanisms. DO Removing tar spots NOT aim water jets directly at components that might be easily Use white spirit to remove tar spots and stubborn grease stains...
  • Page 136 After washing, examine the paintwork for damage. Treat paint Regularly clean all windows, inside and out, using an approved chips and scratches with an MG Rover paint touch-up pencil. If glass cleaner. the damage has revealed bare metal, use a coloured primer first,...

  • Page 137: Cleaning The Interior

    Cleaning & Vehicle Care CLEANING THE INTERIOR Airbag module covers To prevent damage to the airbag SRS, the steering wheel centre Plastic materials Clean plastic-faced materials with diluted upholstery cleaner, then pad and the area of the dashboard containing the passenger airbag wipe with a damp cloth.

  • Page 138: Identification Numbers

    Identification Numbers Identification Numbers IDENTIFICATION NUMBERS 1. Vehicle identification number (VIN) When communicating with your dealer, always quote the Vehicle 2. Engine number Identification Number (VIN). If your communication concerns Petrol engines: Stamped into the front face on the gearbox side the engine or gearbox, it may be necessary to quote these numbers of the cylinder block.
  • Page 139 Identification Numbers Vehicle identification number (VIN) The VIN (and recommended maximum vehicle weights) is stamped on a plate at the foot of the left hand door pillar and also stamped into the centre of the bulkhead at the top, inside the engine compartment.

  • Page 140: Parts And Accessories

    To enhance your motoring pleasure, a comprehensive and versatile range of quality accessories is available. This wide range of genuine MG Rover products is an integral part of the car's design and development programme and will help to guarantee continued reliability, safety and performance.

  • Page 141: Emergency Information

    Emergency Information 142 Emergency Starting 144 Vehicle Recovery 146 Puncture Repair & Wheel Changing 155 Fuse Replacement 160 Bulb Replacement...

  • Page 142: Using Booster Cables

    Emergency Starting Emergency Information Recommended earth points for your car Emergency Starting USING BOOSTER CABLES During normal use, batteries emit explosive hydrogen gas, sufficient to cause severe explosions capable of causing serious personal injury - ensure sparks and naked lights are kept well away from the engine compartment.
  • Page 143 Emergency Starting Starting the car 2. Connect the BLACK booster cable from the negative (-) Turn off the starter switch and ALL electrical equipment of terminal of the donor battery, to a good earth point (e.g. an BOTH vehicles, then follow the instructions that follow: engine mounting, chassis member or other unpainted surface), at least 0.5 m from the battery and well away from Ensure that each booster cable connection is securely made and...

  • Page 144: Vehicle Recovery

    Vehicle Recovery Vehicle Recovery TOWING FOR RECOVERY Models with automatic transmission Ideally, cars fitted with an automatic transmission should only be If your car is to be towed, most qualified recovery specialists will moved by trailer/transporter. If these facilities are unavailable, use wheel lift equipment to suspend the front wheels, while the move the vehicle on suspended tow (with the front wheels raised) rear wheels remain on the ground.
  • Page 145 Vehicle Recovery TRANSPORTER OR TRAILER LASHING DO NOT use the lashing points to tow your car behind another vehicle, or use the lashing points to tow a trailer or caravan. HB0110 If your car is to be transported on the back of a trailer or transporter, use the recommended lashing points at the front and rear of the car only.
  • Page 146 Puncture Repair & Wheel Changing Puncture Repair & Wheel Changing INSTANT TYRE REPAIR (ITR) COMPONENTS* 1. Tyre sealant canister. 2. Safety goggles. 3. Wheel nut cover removal tool 4. Locking wheel nut removal tool. NOTE: ITR is standard equipment for most cars and is designed to provide a temporary repair solution for most tyre tread punctures.
  • Page 147 Puncture Repair & Wheel Changing SPARE WHEEL & TOOLS* 1. Spare wheel. 2. Spare wheel clamp. 3. Wheel nut spanner. 4. Jack. 5. Jack handle. 6. Wheel nut cover removal tool. 7. Locking wheel nut removal tool NOTE: The fitment of a space saver or full size spare wheel and associated tools is available as an option at the time of manufacture and replaces the Instant Tyre Repair (ITR) system.
  • Page 148 Puncture Repair & Wheel Changing ITR COMPONENTS/SPARE WHEEL & TOOL NOTE: ITR is standard equipment for most vans and is designed to ACCESS (Van models only) provide a temporary repair solution for most tyre tread punctures. NOTE: A space saver or full size spare wheel and associated tools is available as an option at the time of manufacture and replaces the Instant Tyre Repair system.

  • Page 149: Safety Precautions

    Puncture Repair & Wheel Changing INSTANT TYRE REPAIR (ITR)* Keep the tyre sealant canister out of the reach of children. Store ITR provides a temporary solution to enable you to reach a dealer the canister in its correct location beneath the loadspace floor; or tyre specialist, where the tyre must be repaired or replaced.
  • Page 150 Where possible, return the canister stationary to avoid straining the filler tube. to an MG Rover dealer for safe disposal and to obtain a 7. Empty the ENTIRE contents of the canister into the tyre.

  • Page 151: Changing A Wheel

    Puncture Repair & Wheel Changing CHANGING A WHEEL Removing the wheel trim (steel wheels only) Always choose a safe place to stop away from the main thoroughfare. Always ask your passengers to get out of the car and wait in a safe area away from other traffic. NOTE: Switch on the hazard warning lights to alert other road users.
  • Page 152 Puncture Repair & Wheel Changing Removing the wheel nut cover (alloy wheels) Positioning the jack NEVER work beneath the car with the jack as the only means of support. The jack is designed for wheel changing only! HB0586 Insert the hooked end of the removal tool into the small rectangular aperture in the wheel nut cover (arrowed in illustration).
  • Page 153 Puncture Repair & Wheel Changing Turning the jack screw by hand, raise the jack until the jack head Always check the tyre pressure after changing a wheel, and fits snugly around the jacking point. Ensure that the base of the have the tightness of the wheel nuts checked by a dealer as soon jack is in full contact with the road surface as possible!
  • Page 154 Puncture Repair & Wheel Changing LOCKING WHEEL NUTS* Removing the locking wheel nut 1. Push the plastic extractor tube firmly onto the locking wheel nut cover (see left inset). By pulling the tube squarely away from the wheel, the stainless steel nut cover can be pulled from the nut.

  • Page 155: Fuse Replacement

    Fuse Replacement Fuse Replacement FUSES Fuse colours Fuses are simple circuit breakers, which protect the car's electrical In both fuse boxes, the fuses are colour coded to identify their equipment by preventing the electrical circuits from being amperage ratings as follows: overloaded.

  • Page 156: Main Fuse Box

    If a replacement fuse fails almost immediately, refer the problem to Owners are advised against removing or replacing fuse 27, your dealer. which protects the airbag SRS. Suspected failure of the airbag SRS, should be investigated by an MG Rover dealer.
  • Page 157 Fuse Replacement Main fuse box fuse specifications Fuse number Rating (AMPS) Circuit protected Horn Window - RH rear Rear fog guard lights Window - LH rear Interior & luggage compartment lights, Seat belt buckle - RH, Audio unit, Door mirrors, Clock Window - LH front Sunroof Window - RH front...

  • Page 158: Engine Compartment Fuses

    Fuse Replacement Spare fuses ENGINE COMPARTMENT FUSES HB0677 A separate module containing spare fuses of varying values is attached to one side of the main fuse box. The module contains: • Five mini-size fuses suitable for the main fuse box. •...
  • Page 159 Fuse Replacement Engine compartment fusebox fuse specifications Fuse number Rating (AMPS) Circuit protected Engine management system, Automatic transmission selector, Speedometer Engine management system, Fuel pump Engine management system, Glow plug relay Air conditioning relay, Cooling fan relay Anti-theft alarm, Central door locking Front fog lights Hazard warning lights Engine management system...

  • Page 160: Bulb Replacement

    Bulb Replacement Bulb Replacement REPLACING BULBS Halogen bulbs Halogen bulbs are used for headlight dipped and main beams and Check the operation of all exterior lights before you drive the car. for front fog lights. This type of bulb may shatter in use if the glass NOTE: Only replace bulbs with the same type and specification.
  • Page 161 Bulb Replacement HEADLIGHTS AND SIDELIGHT 1. Twist the circular cover on the back of the headlight one The inboard headlights (those nearest the centre of the car) contain eighth of a turn anticlockwise to remove. the main beam headlight and sidelight bulbs, while the outboard 2.

  • Page 162: Front Fog Light

    Bulb Replacement FRONT FOG LIGHT Using a cross-headed screwdriver, remove the three screws (2) holding the fog light unit to the bumper and extract the light Replacement bulb: H1 55 watt. unit (3). Twist the bulb holder (4) anti-clockwise one eighth of a turn to release it from the light unit.

  • Page 163: Front Direction Indicators

    Bulb Replacement FRONT DIRECTION INDICATORS When replacing the light unit, insert the outboard side first (the side nearest the side of the car), then carefully ease the inboard side Replacement bulb: 21 watt. of the light into the aperture. Be sure it ‘clicks’ securely into position.
  • Page 164 Bulb Replacement REAR LIGHTS (Saloon models only) Take care to avoid any contact with a hot exhaust system, when carrying out any maintenance at the rear of the car. Insert a flat bladed screwdriver into the slot on the first fastener (see upper inset) and lever the central portion out of its collar, so that it can be pulled out approximately 11 mm.
  • Page 165 Bulb Replacement Detach the electrical connector from the light unit by depressing the release catch (arrowed in inset) and then pulling the connector from the light unit. Raise the lever set into the rear face of the light unit. This will release the light unit, which can then be withdrawn from the car.
  • Page 166 Bulb Replacement REAR LIGHTS (Van models only) Take care to avoid any contact with a hot exhaust system, when carrying out any maintenance at the rear of the car. To access the rear light units, remove the moulded trim panel as follows: Using a cross-head screwdriver, remove the two screws (arrowed in main illustration).
  • Page 167 Bulb Replacement Detach the electrical connector from the light unit by depressing the release catch (arrowed in inset) and then pulling the connector from the light unit. Raise the lever set into the rear face of the light unit. This will release the light unit, which can then be withdrawn from the car.

  • Page 168: Number Plate Light

    Bulb Replacement NUMBER PLATE LIGHT INTERIOR LIGHT Replacement bulb: 5 watt. Replacement bulb: 10 watt Carefully prise the lens from the light housing. Spring the bulb connectors apart to release the bulb. Remove both screws to release the light unit, then pull to remove the bulb from the contact clips.

  • Page 169: Luggage Compartment Light

    Bulb Replacement LUGGAGE COMPARTMENT LIGHT Replacement bulb: 10 watt H3153 Push the lens firmly to the left and, from the rear of the unit, push the light unit to release it from the luggage compartment trim panel. Push and twist the bulb to remove.

  • Page 171: Technical Data

    Technical Data 172 Technical Data 186 Fuel Consumption 188 Declaration of Conformity...
  • Page 172 Technical Data Technical Data ENGINES Technical Data 1.1 litre petrol 1.4 litre petrol Fuel UNLEADED 95 RON to EN 228 Fuel UNLEADED 95 RON to EN 228 specification is recommended † specification is recommended † Capacity 1119 cm Capacity 1396 cm Firing order 1-3-4-2 Firing order...
  • Page 173 Technical Data 1.6 litre petrol 1.8 litre petrol Fuel UNLEADED 95 RON to EN 228 Fuel UNLEADED 95 RON to EN 228 specification is recommended † specification is recommended † Capacity 1588 cm Capacity 1796 cm Firing order 1-3-4-2 Firing order 1-3-4-2 Idle speed 825 ±...
  • Page 174 Technical Data 2.0 litre diesel Fuel Diesel to EN 590 specification Capacity 1994 cm Firing order 1-3-4-2 Idle speed 805 ± 50 rev/min Bore 84.5 mm Stroke 88.9 mm Number of cylinders 4 in-line Compression ratio 19.5:1...
  • Page 175 Technical Data CAPACITIES ELECTRICAL Battery type: Fuel tank (usable) 50 litres H4, sealed for life H4, sealed for life Engine oil (and filter) refill: 1.6 - manual gearbox H4, sealed for life Petrol engines 4.5 litres Diesel engines 4.5 litres 1.6 - automatic gearbox H5, sealed for life 1.8 - manual gearbox...

  • Page 176: Wheels And Tyres

    Technical Data WHEELS & TYRES Wheel size and type Tyre specification Type Size Wheel size Tyre Steel wheels 5.5J x 14 5.5J x 14 Alloy wheels: - steel 175/65 R14 82T - alloy 185/65 R14 86T 14" wheels 5.5J x 14 185/65 R14 86H 15"...

  • Page 177: Tyre Pressures

    Technical Data TYRE PRESSURES Tyre pressures - bar 175/65 R14 185/65 R14 185/55 R15 205/45 R16 205/50 R16 205/45 R17 Normal driving conditions 1.1 models 1.4 models 1.6 models - Manual transmission 1.6 models - Automatic transmission 1.8 models - Manual transmission 1.8 models - Automatic transmission 1.8 - 160 models 2.0 - Diesel models...
  • Page 178 Technical Data Tyre pressures - bar 175/65 R14 185/65 R14 185/55 R15 205/45 R16 205/50 R16 205/45 R17 Maximum load conditions (car loaded to maximum gross vehicle weight) 1.1 models 1.4 models 1.6 models - Manual transmission 1.6 models - Automatic transmission 1.8 models - Manual transmission 1.8 models - Automatic transmission 1.8 - 160 models...
  • Page 179 Technical Data Tyre pressures - bar 175/65 R14 185/65 R14 185/55 R15 205/45 R16 205/50 R16 205/45 R17 Speeds above 100 mph (160 km/h) 1.1 models 1.4 models 1.6 models - Manual transmission 1.6 models - Automatic transmission 1.8 models - Manual transmission 1.8 models - Automatic transmission 1.8 - 160 models 2.0 - Diesel models...
  • Page 180 Technical Data Tyre pressures - bar 175/65 R14 185/65 R14 185/55 R15 205/45 R16 205/50 R16 205/45 R17 Towing 1.1 models 1.4 models 1.6 models - Manual transmission 1.6 models - Automatic transmission 1.8 models - Manual transmission 1.8 models - Automatic transmission 1.8 - 160 models 2.0 - Diesel models...
  • Page 181 Technical Data DIMENSIONS HB0120b 25 models ZR models Overall length - A 3990 mm 4011 mm Overall width (exc. mirrors) - B 1688 mm 1688 mm Overall height (sunroof closed) - C 1419 mm 1400 mm Wheelbase - D 2500 mm 2500 mm Front overhang - E 805 mm...
  • Page 182 Technical Data LOADSPACE DIMENSIONS (Van models only) HB0664 25 models ZR models Aperture maximum height - A 795 mm (157.1 in.) 795 mm (157.9 in.) Aperture maximum width - B 1125 mm (66.5 in.) 1125 mm (66.5 in.) Maximum height - C 895 mm (55.9 in.) 895 mm (55.1 in.) Maximum length - D...
  • Page 183 Technical Data WEIGHTS (Saloon models) 1.8 - 160 2.0 Diesel Approximate unladen vehicle weight † 1020 - 1110 1020 - 1135 1030 - 1120 1030 - 1135 1090 - 1145 1130 - 1230 - Manual transmission 2245 - 2445 2245 - 2500 2270 - 2465 2270 - 2500 2400 - 2520...
  • Page 184 Technical Data WEIGHTS (Van models) 25 models ZR models 2.0 Diesel Turbo Diesel Approximate unladen vehicle weight † 1000 - 1100 1115 - 1215 1015 - 1120 1070 - 1175 1125 - 1230 2200 - 2420 2455 - 2675 2235 - 2470 2355 - 2490 2480 - 2710 Max.
  • Page 185 Technical Data TOWING WEIGHTS 1.8 - 160 2.0 Diesel Max. trailer weight (unbraked) Max. trailer weight (braked) 1000 1000 1000 1000 1000 Max. nose weight (Tow hitch downward load) † Max. roof rack load Gross train weight = maximum laden vehicle weight + maximum trailer weight †...

  • Page 186: Fuel Consumption

    Fuel Consumption Fuel Consumption FUEL CONSUMPTION The fuel consumption figures shown below have been calculated using a standard testing procedure (the new EC test procedure from Directive 99/100/EC), and produced in accordance with The Passenger Car Fuel Consumption (Amendment) Order 1996. Under normal use, a car's actual fuel consumption figures may differ from those achieved through the test procedure, depending on driving technique, road and traffic conditions, environmental factors, vehicle load and condition.
  • Page 187 Fuel Consumption Urban cycle The urban test cycle is carried out from a cold start and consists of a series of accelerations, decelerations and periods of steady speed driving and engine idling. The maximum speed attained during the test is 50 km/h with an average speed of 19 km/h. Extra-urban cycle The extra urban test cycle is carried out immediately after the urban test.

  • Page 188: Declaration Of Conformity

    Declaration of Conformity Declaration of Conformity HB0170...
  • Page 189 Index Bonnet opening ..............119 Booster cables ..............142 ABS ................... 84 Boot (opening) ..............12 ABS warning light .............. 85 Boot light bulb ..............169 Access code ................ 14 Brake fluid ................ 125 Accessories ............... 140 Brake lights ............. 164 Air conditioning ............
  • Page 190 Index Compact disc single play controls - CD32 ......98 Compact disc stowage ............45 Electronic brake force distribution ........84 Continuously variable transmission ........69 Emission control ............... 116 Coolant top-up ..............124 Empty fuel tank ..............75 Cooling system ..............124 Engine compartment fuses ..........
  • Page 191 Index Gauges ................56 Identification numbers ............138 Gearbox number .............. 138 Ignition ................61 Gears - automatic ............... 69 In-car telephones ..............46 Gears - manual ..............68 Indicators ................77 General data ..............172 Inertia switch ..............76 Instrument panel ..............
  • Page 192 Index Locking - models with central door locking ......8 Polishing the paintwork ............ 136 Locking - models without central door locking ....10 Pollen filter ................. 37 Locking wheel nuts ............154 Power steering fluid ............126 Luggage compartment (opening) ........12 Pre-tensioners ..............
  • Page 193 Index Reverse light bulb ........... 164 Starter switch ..............61 Roof racks ................. 50 Starting - diesel models ............63 Routine servicing ............. 116 Starting - petrol models ............62 Running-in ................ 64 Steering column adjustment ..........29 Steering lock ..............61 Stepspeed transmission ............
  • Page 194 Index Van load space ..............51 Vanity mirror ............. 31 Vehicle identification number ........... 139 Vehicle recovery ............... 145 Ventilation ................. 35 VIN plate ................. 139 Volumetric protection ............11 Warning lights ..............58 Washer jets ............... 130 Washer reservoir - top-up ..........130 Washing the car ..............
  • Page 195 END OF OWNER'S HANDBOOK...

This manual is also suitable for:

Rover 25 series

Table of Contents

Save PDF