Table of Contents
Advertisement
EMERGENCY INFORMATION
5 Remove 2 screws (1) securing the side direction
indicator lamp onto the exterior door mirror
assembly.
6 Disconnect the connector (2) and remove the side
direction indicator lamp.
7 Remove the rubber bulb holder from the lamp
assembly （pull from lamp）.
252
8 Remove bulb from holder.
9 Fit bulb to bulb holder-push fit.
10 Position bulb holder into lamp assembly and push fully
into position.
11 Position the lamp assembly on the exterior door
mirror assembly, fit and tighten 2 screws.
12 Reconnect the electrical connector.
13 Locate the exterior door mirror cover on the mirror
assembly, carefully push the cover until it clips to place.
14 Reconnect the electrical connectors to the door
mirror glass.
15 Position the glass onto the exterior door mirror
motor body.
16 Using even hand pressure, press the glass onto the
motor until it clips into place.
17 Refit the exterior mirror glass.
Advertisement
Table of Contents
