Table of Contents
Advertisement
6.
Click the
button (see figure 19,
Connect
panel, followed by a check mark.
Connected Device
Figure 19.
Connection Method Menu on the Add Device Window
7.
Click the
button in the
Browse
8.
In the
window, navigate to the new firmware file, which has an .S19 extension,
Open
and double-click it.
ATTENTION:
•
Valid firmware files must have the file extension .S19. A file with any other
extension is not a firmware upgrade for this product and could cause the switcher
to stop functioning.
•
Les fichiers firmware valides doivent contenir l'extension fichier .S19. Un
fichier avec n'importe quelle autre extension n'est pas une mise à jour de
firmware pour cet appareil et l'appareil pourrait arrêter de fonctionner.
On the
window, the path to the new firmware file is displayed in the
Add Device
field.
).
1
DVC RGB-HD A
New Firmware File (Optional)
DVC RGB-HD A • Remote Configuration and Control
appears in green in the
panel (
).
2
Path
28
Advertisement
Table of Contents
