Extron electronics DVC RGB-HD A User Manual page 36

9. If this is the only device to which you are uploading firmware, click
dialog box (see
Device
The DVC information is added to the
(see figure 20, ) and the
1
Figure 20. Firmware Loader Screen with a DVC RGB-HD A Added
If you will be uploading the firmware to multiple devices that are connected to
your computer, do the following:
a. Click the
Add Next
to the panel (see figure 20,
Device
window remains open.
Add Device
b. For each additional device that you want to add to the
repeat steps 5 through 8, then click
c. For the last device, click
the window.
Add Device
10.
If you want to remove devices from the
a. Click on the names of the devices to be deleted, to highlight them.
b. Click >
Edit Remove Selected Device(s)
from the panel.
Device
To remove all devices, click
To add devices after the
to reopen the
Device(s)
figure 19, , on the previous page).
3
panel of the
Device
window closes.
Add Device
button in the dialog box. Your first device is added
Add Device
) of the
2 Firmware Loader
.
Add Next
(instead of
Add Add Next
panel, do the following:
Device
. The selected devices are removed
>
Edit Remove All Devices
dialog box has closed, click
Add Device
window. Repeat step 9 as needed.
Add Device
DVC RGB-HD A • Remote Configuration and Control
in the
Add
window
Firmware Loader
window, and the
window,
Firmware Loader
) to add the device and to close
.
>
Edit Add
Add
29