Table of Contents
Advertisement
Mounting under Furniture
To mount the DVC RGB-HD A under furniture using optional Extron mounting kit MBU 125
(provided):
1.
Attach the mounting brackets to the DVC RGB HD with the provided machine screws
as shown in figure 22.
#8 Screw
(2) Places
Each Side
Figure 23.
2.
Hold the unit with the attached brackets against the underside of the table or other
furniture.
3.
Mark the location of the screw holes in the brackets on the mounting surface.
4.
Drill pilot holes 3/32 inches (2.5 mm) in diameter and 1/4 inch (6.3 mm) deep in the
mounting surface at the marked screw locations.
5.
Insert #8 wood screws into the four pilot holes.
6.
Tighten each screw into the mounting surface until just less than 1/4 inch (6.3 mm) of
the screw head protrudes.
7.
Align the mounting screws with the slots in the brackets and place the DVC and
brackets against the surface, with the screws through the bracket slots.
8.
Slide the unit slightly forward or back, then tighten all four screws to secure it in place.
MBU 125
Mounting Bracket
Mounting the DVC RGB-HD Under Furniture
DVC RGB-HD A • Mounting
33
Advertisement
Table of Contents
