Table of Contents
Advertisement
Loading the Firmware to the DVC
To load a new version of firmware to the DVC using Firmware Loader:
1.
Connect your computer to the DVC via the rear panel USB port (see
USB Control
2.
If you have not already done so, download and install the Firmware Loader executable
installer file to your computer (see
page 23).
3.
If necessary, download the latest version of DVC RGB-HD A firmware and install it on
your computer (see
the previous page).
4.
Open the Firmware Loader on your computer. The
with the
NOTE: You can also open Firmware Loader from within the PCS software. See the
PCS help file for DVC RGB-HD A for instructions.
Figure 18.
5.
On the
menu (see figure 18,
Because there is only one connection method for the DVC RGB-HD A, the
Method
connection information.
on page 8).
Downloading and Installing Firmware Loader
Downloading and Installing the DVC RGB-HD A Firmware
dialog box in front.
Add Device
Firmware Loader Window with Add Device Dialog Box
window, select
Add Device
).
1
and
fields are automatically populated with your USB
Available Devices
DVC RGB-HD A • Remote Configuration and Control
Firmware Loader
from the
DVC RGB-HD A
Device Name
Connecting for
on
on
window opens
drop-down
Connection
27
Advertisement
Table of Contents
