Crankcase Cover/Crankshaft/Balancer/ Piston; Crankcase Cover - Honda EU65is Service Manual

cap.14 EU65is 6500is 07.12.17 5:05 PM ページ14-1
14. CRANKCASE COVER/CRANKSHAFT/
BALANCER/PISTON

1. CRANKCASE COVER........................ 14-1

1. CRANKCASE COVER
a. DISASSEMBLY/REASSEMBLY
Remove the engine/generator assembly (P. 10-1), then remove the following parts:
– Generator (P. 11-5)
– Flywheel (P. 12-1)
– Cylinder head (P. 13-1)
On reassembly, apply engine oil to the following parts:
– Crankshaft bearing
– Camshaft bearing
[9]
6202 BALL BEARING
INSPECTION: P. 14-3
REPLACEMENT: P. 14-2
[8]
OIL FILLER CAP/
DIPSTICK
14-1
[1] [2]
DOWEL PIN (2) 6207 CRANKSHAFT BEARING
INSPECTION:
REPLACEMENT: P. 14-2
[7]
O-RING
[6]
35 x 52 x 8 mm
OIL SEAL
2. CRANKSHAFT/BALANCER/
PISTON .............................................. 14-4
P. 14-3
[3]
CRANKCASE GASKET
Do not reuse.
[4]
CRANKCASE COVER
8 x 40 (4)
24 N . m (2.4 kgf . m, 18 Ibf . ft)
8 x 60 (3)
24 N . m (2.4 kgf . m, 18 Ibf . ft)
[5]
Apply grease to
the lip of the oil
seal.