Chapter 4 Upgrade - RGBlink TAO 1pro-S User Manual

Chapter 4 Upgrade

Tool: USB disk(copy the firmware to the root directory of USB disk)
Upgrade Steps:
Copy the file to the root directory of the U disk.
1.
2. Insert the U disk into the record USB port. Power on TAO 1pro-S.
2. Click [About] in the scroll area,then choose [Update] to enter the following interface. Choose
V1.3.16_3.81_2.15 in [Version Select], then click [Upgrade]
4.The screen will pop up a message to remind users whether to upgrade the device, you can click
[Yes] or [No] according to the requirements. TAO 1pro-S will restart automatically after the upgrade.
It is recommended that the users restart the device again after the upgrade.
1.Please make sure no signal source to HDMI input.
2.Please do not power off during upgrade.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
.
23