T-Bar Calibration; Upgrade - RGBlink mini pro User Manual

Note: If you have forgotten your password, please restore the factory settings on the mini-pro.

T-Bar Calibration

If the T-Bar is not in the correct position, no other operation is possible. t-Bar correction is available
in XPOSE mini.
The steps are as follow：
1. Turn on the T-Bar Calibration switch.
2. Push the T-Bar to the far right on the mini-pro.
3. Turn on the "On" switch
4. Push the T-Bar to the far left on the mini-pro.
5. Turn on the "On" switch

5.3 Upgrade

1.Tools：
 Firmware ZIP upgrade package
 XTOOL (V1.0.1.10 or higher) -packaged in the ZIP
 Computer with network connection
o Windows (minimum Win 7, Win 10 recommended)
o
macOS (minimum 10.13 High Sierra)
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
38