Language Selection - Bosch DICENTIS Configuration Manual

DICENTIS
–
–
5.4.9

Language selection

Here you can configure:
–
–
–
Notice!
i
Some languages will not be available for participants and interpreters if the value of
Remaining Dante I/O Licenses is below 0.
–
Notice!
i
Unprocessed language streams can only be created for languages sourced by DICENTIS
Interpreter desks.
–
Bosch Security Systems B.V.
Power Off: Allows the device to power off the system (DCNM-MMD2, Meeting
Application, Synoptic application, and API).
Volume Control: Allows the device to control the master volume (DCNM-MMD2, Meeting
Application, and API).
Which languages are available on the contribution devices
Language is displayed on contribution device as:
– Original: the original description of the language is displayed.
– Number and abbreviation: the number assigned to the language in Languages along
with its abbreviation are displayed.
– Number and original: the number and the original description of the language are
displayed.
– Abbreviation: the abbreviation for the language is displayed.
– Skip unused (assigned) languages: unused languages, displayed as (---) are skipped
on the devices of participants. For interpreters unused languages cannot be skipped,
as this would affect the order of the languages and the possibility to count the steps
while setting up their inputs using the rotary on the interpreter device.
Dante I/O Licenses: Shows the number of Dante
– Total Dante I/O licenses Shows the total number of Dante
– Dante inputs: Shows the number of Dante
– Dante remote desk inputs: Shows the number of Dante
languages coming from remote desks.
– Send to Dante: Shown the number of licenses used to send languages to Dante
– Unprocessed send to Dante: Shows the number of licenses used to send
unprocessed languages to Dante
– Remaining Dante I/O Licenses: Shows the number of remaining Dante
licenses.
Unprocessed language streams: Check this box to enable extra options to create a
second stream for a language. This second stream can be used for external parties that
require an unprocessed audio stream. It also allows the possibility to configure the
Unprocessed, Headroom, Send to Dante, and Floor filling options per language.
Note: The DICENTIS system supports a maximum of 100 language streams. By enabling
this option, the number of languages changes from 100 to 50 to allow for the second
unprocessed stream per language.
Languages: Shows the available translated languages received from the Conference
system.
TM
TM
.
Configuration manual
Meeting application | en
TM
I/O licenses divided in:
TM
I/O licenses.
licenses used for languages.
TM
licenses used for
75
TM
.
TM
I/O
2021.06 | V3.7 |