Configuring Dante™ Compatible Devices; Setting A Pin Code For A Dante™ Device - Bosch DICENTIS Configuration Manual

DICENTIS
14.22 Configuring Dante™ compatible devices
The DICENTIS Conference System supports integration with third party Dante
devices (like for example, a laptop). Configuring which Dante
to the Dante
Dante Controller which can be downloaded from the Audinate website.
Note: The Dante Virtual Device is running on the DICENTIS Conference System server for the
Dante
possible to install any other Dante
Note: The Dante Controller can be run from any computer in the network. Its serves to route
Dante
1.
2.
–
–
–
Next, multicast streams need to be created from the transmitters, as the DICENTIS
Conference System utilizes these:
1.
2.
3.
4.
5.
14.23 Setting a PIN code for a Dante™ device
To increase security and prevent access from unauthorized parties, a technician should set a
4-digit PIN code to lock each Dante
To set a PIN code for a Dante
1.
2.
3.
4.
5.
P
Bosch Security Systems B.V.
TM
inputs and outputs of the DICENTIS Conference System is done via Audinate's
TM
functionality. Only one Dante
TM
inputs and outputs between Dante
Open the Dante Controller Network view.
TM
The new Dante devices from the APS are shown on the screen:
Dante Receivers:
DICENTIS <hostname server>
– Dante In 1
– Dante In 2
Dante Transmitters:
DICENTIS <hostname server>
– Dante Out 1
– Dante Out 2
All other devices that are visible on the network are shown as well.
Press Ctrl-D to open the Device info view.
Select the device you want to configure to work with DICENTIS.
Go to the Transmit tab.
Press Ctrl-M to create a multicast flow.
Make sure to select only 1 channel per multicast flow.
When the multicast flows have been created, switch back to the Dante Controller
network view to create the connections you want. All successful connections are shown
by a check mark.
For further details on configuring Dante
Open the Dante Controller application
Select the Device Info tab
In the Device Lock column, left click the row of the device you wish to lock
Enter a 4-digit code in the PIN field, and confirm the code in the Confirm PIN field
Click the Lock button
The PIN code is now set for the Dante
TM
device can be active on a computer, therefore it is not
TM
device on the DICENTIS Conference System server.
TM
compatible devices.
TM
, refer to the "Dante Controller User Guide".
TM
device in the network.
TM
device:
TM
device.
Configuration manual
Hints and Tips | en 121
TM
compatible
TM
inputs and outputs are routed
2021.06 | V3.7 |