First Time Log In; Configuration Procedure - Bosch DICENTIS Configuration Manual

88 en | DICENTIS Webserver
Person Not a
Notice!
i
Internet Explorer is no longer supported as of version 3.2.
6.1

First time log in

The DICENTIS Webserver uses an https connection and a certificate to secure the connection.
The first time you log in on the server device, the new certificate is automatically installed.
On a client device, the certificate has to be manually installed:
1.
2.
3.
6.2

Configuration procedure

Precondition
–
To configure the synoptic views:
1.
2021.06 | V3.7 |
-
particip
ant
Particip view
ant
Particip view
ant and
with control
manage
meeting
rights
From your client device, open the address http://<server>/DICENTISCertificates.
Select the language of your instructions on the drop-down menu at the top right corner of
the page.
Follow the instructions to download the certificate and configure the browser.
Note: If your browser is not automatically recognized, select the correct browser using
the drop-down menu at the top of the page.
To use this page, the logged in user must belong to a User Group that has the right
Configure System (for example, Admin User).
Log in with the user "Admin" in the synoptic application.
– Click the Select background button, and select a suitable background for the room.
– Click the Start configuration button.
– Drag and drop the synoptic icons to the place where they are physically sitting in the
room. You can also remove unwanted seats from the layout by dragging and
dropping them back to the seats list. Use Show grid and Snap to grid for easier
placement in a (large) room.
– Drag and drop the Booth, Majority, Quorum, and/or Voting icons to the desired place
in the synoptic layout.
- - -
view view -
view view view
and
control
Configuration manual
- - -
- - -
view view view
Bosch Security Systems B.V.
DICENTIS
-
-
-