Bosch DICENTIS Configuration Manual page 86

86 en | Meeting application
Connecting two DICENTIS systems
It is possible to connect two or more rooms together using the Dante gateway: one room for
the participants in the discussion and the interpretation; and the other rooms for the audience
and additional interpretations:
–
–
–
Figure 5.9: Dante gateway configuration
Note: Using mix-minus you can have participants speaking in two rooms. Mix-minus does not
work in more than two rooms.
Notice!
i
If the discussion is only held in one room, use "Recorder (Int. floor)" to deliver the floor to
the other room.
Refer to
–
2021.06 | V3.7 |
The configuration for each room is done separately
TM
The Dante network is used for routing and recording the audio
The Dante network is configured using the Dante Controller or Dante Domain manager
Language selection, page 75
Room 1
Room 2
Configuration manual
DICENTIS
Bosch Security Systems B.V.