Software Installation; Installing The Dicentis Software Suite; Downloading Software To The Devices - Bosch DICENTIS Configuration Manual

DICENTIS
4

Software installation

Before the DICENTIS Conference System can be used, it needs to be configured.
Configuration of the system is done in the following order:
–
–
–
–
–
–
4.1

Installing the DICENTIS software suite

Configure network interface
Notice!
i
Before installing the DICENTIS software, make sure the server PC only has one enabled
network interface (Bluetooth is also seen as a network interface).
Download and install latest version of DICENTIS System Server Software from the Internet
1.
2.
3.
Notice!
During the system software installation, the application WinPcap will be installed as part of
i
the Network Docent package.
If you cancel the WinPcap installer, the system software installation process will fail. Simply
restart the installation process and follow the steps in the WinPcap installer.
Notice!
i
After installing/upgrading the System Server Software, make sure you download the latest
version of the software to the devices, as described in Downloading software to the devices,
page 29 .
Refer to
–
4.2

Downloading software to the devices

–
Bosch Security Systems B.V.
Network installation:
– This is not part of one of our Bosch Security Systems B.V. manuals, and needs to be
defined together with your local IT department. Refer to Hardware requirements,
page 19 and Network requirements, page 22 .
Installation of hardware devices:
– This is not part of this manual. Refer to the DICENTIS Hardware Installation manual.
Refer to the product related information on www.boschsecurity.com.
Installation of software: Installing the DICENTIS software suite, page 29 .
Activate the system and application software by registering the software: Adding and
removing licenses, page 30 .
Update device (firmware) software: Downloading software to the devices, page 29 .
Configuration of system and application software: Meeting application, page 37 .
Go to: https://licensing.boschsecurity.com/software
Click the Software link (small square) to download the latest version of the software.
You can also download the latest version of the Release Notes here.
Follow the on-screen instructions.
Downloading software to the devices, page 29
Factory delivered DICENTIS devices are delivered with diagnostics software and must be
upgraded to the latest software version before they can be used.
Configuration manual
Software installation | en
2021.06 | V3.7 |
29