If you think the equipment is damaged or presents a potential hazard, you should label the equipment and put it to one side, so that no‑one else can use it. Then contact your local technician for further advice. 2016.11 | V1.0 | User manual Bosch Security Systems B.V.
About this manual | en About this manual The purpose of this manual is to provide information required for operating the DICENTIS Discussion devices of the DICENTIS Conference System. This manual is available as a digital document in the Adobe Portable Document Format (PDF).
| Overview DICENTIS Overview The DICENTIS Conference System is an IP based conference system which runs on an OMNEO compatible Ethernet network. It is used for distributing and processing audio, video and data signals. The DICENTIS Discussion devices are used to contribute to a meeting. The following devices are available: –...
Microphone socket for attaching the microphone. Touchscreen 4.3” capacitive touchscreen (DCNM-DE only). Identification Area where Near Field Communication (NFC) tag is detected and read (DCNM‑DSL, DCNM‑DVT and DCNM‑DE only). Connections Cable glands. Bosch Security Systems B.V. User manual 2016.11 | V1.0 |...
In Voice mode, you cannot make a request-to-speak. Note: If the DICENTIS Discussion device is set to Chairperson mode there is no mute button, because the left button is used as a priority button. Find your seat: The touchscreen of the DICENTIS Discussion device with touchscreen shows your name in the bottom balloon.
The touchscreen of the DICENTIS device with touchscreen will display instructions for identifying yourself. The DICENTIS Discussion device with language selector and the DICENTIS Discussion device with voting will instruct you to identify you by a blinking LED. – Hold your NFC tag close to the left-hand side of the DCNM-DVT, or DCNM-DE as indicated on the touch screen.
| DICENTIS Discussion devices operation DICENTIS Single-use indication White possible-to-speak icon lit: – You can speak immediately by pressing the microphone request button. LED‑bars and microphone LED green or green flashing: – You have to wait to speak. –...
When the speakers list is not erased, the system switches on the microphones of the speakers again. Voice mode: When your DICENTIS Discussion device is in Voice mode, the microphone is always on. Push and hold your microphone request button to temporarily mute the microphone. Find your seat: The touchscreen of the DICENTIS Discussion device with touchscreen shows your name in the bottom balloon.
| DICENTIS Discussion devices operation DICENTIS Chairperson indication White priority icon and possible-to-speak icon lit: – You can speak immediately by pressing the microphone request button. – You can press the priority button to speak and temporarily switch off the microphones of all participants.
Voice mode: When your DICENTIS Discussion device is in Voice mode, the microphone is always on. Push and hold your microphone request button to temporarily mute the microphone. In Voice mode, you cannot make a request-to-speak.
| DICENTIS Discussion devices operation DICENTIS – Cast your vote. You can change your vote until the clerk or operator has closed the voting session. The clerk or operator can temporarily hold the voting session. While the voting session is on hold, you cannot cast or change your vote.
DICENTIS DICENTIS Discussion devices operation | en Dual-use indication Both possible-to-speak icons lit: – Each participant can speak immediately by pressing their own microphone request buttons. Left possible-to-speak icon lit. Right LED-bar and microphone LED green or green flashing: –...