Dcnm-Fsl Flush Language Selector - Bosch DICENTIS Hardware Installation Manual

66 en | Mechanical installation of Contribution Devices
a
Removing a flush-mounted device
7.2.1

DCNM-FSL Flush language selector

Connect the language selector to a PoE switch in the DICENTIS network with a CAT-5e cable.
External headphones socket
You can connect an external headphones socket to the language selector (e.g. a 3.5 mm
headphones socket). The external headphones socket must be connected to a plug or to
solder pads.
Figure 7.5: External headphones connection
The solder pads , external headphone connector, and built-in 3.5 mm socket are internally
connected.
2021.01 | V2.2 |
DCNM-FET
b c
EXTERNAL
HEADPHONE
Hardware Installation Manual
DICENTIS
Bosch Security Systems B.V.