System Extension - Bosch DICENTIS Configuration Manual

94 en | System extension
7

System extension

The DICENTIS Conference System is scalable from small to medium to large. This section
describes what a small, medium and large system is and what the requirements are for these
systems:
A small to medium DICENTIS Conference System (see Typical system setup) consists of:
–
–
–
–
A large DICENTIS Conference System consists of:
–
–
Device
DICENTIS server
DICENTIS meeting application
DICENTIS Audio processor and powering switch
DICENTIS Powering switch
DICENTIS multimedia device
DICENTIS discussion device
DICENTIS discussion device select language
DICENTIS discussion device voting
DICENTIS discussion device extended
DCNM-IDESK Interpreter desk
DCNM-IDESKVID Interpreter desk with video
DCNM-FSL Flush language selector
OMN-DANTEGTW Dante gateway
PRS-4OMI4 OMNEO media interface
OMN-ARNIE ARNI‑E OMNEO interface
OMN-ARNIS ARNI‑S OMNEO interface
Tab. 7.2: Node and device count of DICENTIS equipment
2021.06 | V3.7 |
up to 450 DICENTIS nodes.
Refer to table Node and device count of DICENTIS equipment below about the node and
device count of DICENTIS equipment.
all DICENTIS devices in 1 subnet.
1 DICENTIS Audio processor and powering switch for the audio processing.
1 Server PC which hosts the DICENTIS services.
up to 1500 DICENTIS devices.
multiple subnets connected by use of a router/L3 switch.
– Each subnet can have up to 450 DICENTIS nodes.
Refer to the following table for the node count of DICENTIS equipment.
– The first subnet has:
- 1 DICENTIS Audio processor and powering switch for the audio processing.
- 1 Server PC which hosts the DICENTIS services.
- 1 ARNI-Enterprise to increase the size of the system.
– All other subnets have 1 ARNI-Standard to increase the size of the system.
Note: There is no DICENTIS Audio processor and powering switch in the other
subnets.
Configuration manual
Node count Device count
0 0
0 0
1 1
1 1
2 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 0
1 0
0 1
0 1
Bosch Security Systems B.V.
DICENTIS