Installation Wireless Devices And Accessories - Bosch DICENTIS Instruction Manual

Wireless conference system
Hide thumbs Also See for DICENTIS:
Table of Contents

Advertisement

DICENTIS
6

Installation Wireless Devices and Accessories

The Wireless Devices are used to add participants to a discussion. See System overview, page
8, if required.
Scope of delivery
Installation
The Wireless Devices are free‑standing (table-top use). No mechanical installation, other than
the accessories as described below, is required.
Caution!
If a Wireless Device Extended is moved from a warm and humid environment to a cold
!
environment there is a possibility that some condensation can form on the display. To prevent
this from happening, make sure each Wireless Device Extended is given sufficient time to
acclimatize.
10
9
DCNM-WDE and DCNM-WD top, rear and base view
Caution!
!
Do not open the Wireless Device. Any hardware change makes the product certificates
invalid. Only qualified personnel may open the Wireless Devices.
Installation of accessories
Follow below steps to install the required accessories to, and placing of, the Wireless Devices.
These steps are a summary:
1.
2.
Bosch Security Systems B.V.
The DCNM-WD and DCNM-WDE are shipped without (accessory) parts.
1
2
4
5 6 7 8
Check that all equipment is available.
For your reference, see the Wireless Device figure and table in this section.
Installation Wireless Devices and Accessories | en
3
9 10
15
16
17
Installation Manual
11
12 13
14
18
19
2015.03 | V1.01 |

Advertisement

Table of Contents
loading

Table of Contents