Appendix; Selecting The Metering Auger - horsch Pronto 3 - 6 DC Operating Instructions Manual

Appendix

Selecting the metering auger

Metering augers in different sizes are available
for different granulates/types of fruit and plac-
ing quantities. The volume is embossed on the
auger shaft for differentiation.
Metering auger
114
The preselection of the metering auger does
•
not replace calibration!
Depending on the result of the calibration, it
may be necessary to switch to a larger/smaller
metering auger.
The specified working widths apply to ma-
•
chines with one metering auger.
Size in cm³
For machines with two metering augers, the
table for half the working width must be used
3
(e.g. Table 3 m for machine with 6 m working
width).
6
If according to the table several metering
•
augers can be used:
Select the auger with which the intended
12
placing quantity lies as close as possible to
the centre of the min./max. placing quantity.
24
38
66
NOTES