Appendix; Selecting The Metering Auger - horsch Maestro 12 SV Translation Of The Original Operating Instructions

19.1 Selecting the metering auger

60028609 • 01 • 03/2021 • en

19 Appendix

Metering augers in different sizes are available for different granulates/types of fruit
and placing quantities. The volume is embossed on the auger shaft for differenti-
ation.
Metering auger
NOTE
Ø Select the metering augers according to the following table.
Ø If according to the table several metering augers can be used:
Select the auger with which the intended placing quantity lies as close as pos-
sible to the centre of the min./max. placing quantity.
Ø The preselection of the metering augers does not replace calibration!
Depending on the result of the calibration, it may be necessary to switch to a
larger/smaller metering auger.
Size in cm³
3
6
12
24
38
66
155