Type Plate - horsch Pronto 3 - 6 DC Operating Instructions Manual

•
Deviations due to technical further development reserved.
NOTE:
•
The weight of the implement depends on the equipment; specification with minimum equipment
•
The permissible transport heights and transport width for road traffic may differ from country to country. Comply with the
national registration regulations.
•
Implement attachment tractor link arm: III:

Type plate

The type plate with the CE marking is located
on the frame of the machine.
Data on the type plate:
Type approval number
Vehicle identification number
Technically permissible total
Permissible drawbar load
Technically permissible axle
load (axles 1/2/3)
20
Coupling point distances Cat. III;
IV: Coupling point distances Cat. IV;
II/III: Coupling point distances Cat. II;
III/IV: Coupling point distances Cat. III;
Vehicle class
Maschinen GmbH
(VIN)
weight
A-0:
A-1:
A-2:
A-3:
Model designation
Serial number
Sitzenhof 1
D-92421 Schwandorf
www.horsch.com
SN
kg
T-1 T-2
kg ---
B-1
kg
B-2
kg
B-3
kg
B-4
Pin diameter Cat. III
Pin diameter Cat. IV
Pin diameter Cat. III
Pin diameter Cat. IV
Year of
Made in Germany
construction
T-3