Figure 7 Air Gap - KEB COMBISTOP Instruction Manual

Installation
Size 02
Xn [mm] 0.2
9. Connect the COMBISTOP brake lead lines to an appropriate DC voltage to test brake
function. The brake will release when voltage is applied, and engage when the voltage
supply is powered off.
10. The COMBISTOP brake is now ready for use.
Refer to the following chapter for instructions on installing optional components.
2021 KEB America, Inc.
©

Figure 7 Air Gap

03 04 05
0.2 0.2 0.2
06 07 08
0.3 0.3 0.4
09 10 11
0.4 0.5 0.6
27