Chapter 1 Understanding The Installation Flow - Fujitsu SPARC M12-1 Installation Manual

Table 1-1 Workflow for the SPARC M12-1 (continued)
Step (Work Time (*1)) Work Description
13 Perform the initial diagnosis test on
the hardware.
14 Check the status of mounted
components.
Initial system settings (approx. 50 minutes)
15 Set the password policy.
16 Set a user account and password.
17 Configure the telnet or SSH service.
18 Configure the HTTPS service.
19 Configure the XSCF network.
20 When duplicating memory,
configure memory mirroring.
21 Create a PPAR configuration list.
22 Assign the SPARC M12-1 (system
board) to a physical partition.
23 Clear the difference between the
system time and physical partition
(PPAR) time.
24 Register a CPU Activation key with
the XSCF.
25 Assign CPU core resources to the
physical partition.
26 Confirm the start/stop of the
physical partition and the
connection of the console.
27 Either use the preinstalled Oracle
Solaris as is or reinstall it. (Note)
Reference
"5.7 Performing a Diagnosis
"5.8 Checking the Component
Status"
"6.1 Setting the Password
"6.2 Setting a User Account and
Password"
"6.3 Configuring the Telnet/SSH
Service"
"6.4 Configuring the HTTPS
Service"
"6.5 Configuring the XSCF
Network"
"6.6 Configuring Memory
Mirroring"
"6.7 Creating a PPAR Configuration
List"
"6.8 Checking the Physical
Partition (PPAR) Status"
"6.9 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
"6.10 Registering a CPU Activation
Key"
"6.11 Assigning CPU Core
Resources"
"6.12 Starting/Stopping the System
(PPAR)"
Chapter 1 Understanding the Installation Flow
Test" Required
Required
Policy" Required
Required
Required
Required
Required
Optional
Optional
(*5)
Optional
Required
Required
(*6)
Required
Required
3