Figure 3-33 Completed PCI Expansion Unit Configuration
3.5
Mounting Optional Components
This section describes the procedures for mounting optional components such as
memory and PCIe cards.
If optional components are ordered together with the chassis, they are shipped
mounted in the chassis. If the optional components are ordered separately, they will
need to be mounted on site. Mount optional components after mounting the chassis
in the rack.
Mounting Optional Components in the SPARC M12-1
■
Mounting Optional Components in the PCI Expansion Unit
■
3.5.1
Mounting Optional Components in the SPARC
M12-1
The following table lists the optional components and references for the SPARC
M12-1. For detailed procedures, see the Fujitsu SPARC M12-1 Service Manual, and
perform work accordingly. All the references in the table can be found in the Fujitsu
SPARC M12-1 Service Manual.
Chapter 3 Installing the System
65