Fujitsu SPARC M12-1 Installation Manual page 118

Table 6-5
You can also change the parameter settings later.
Table 6-5 Oracle Solaris Configuration Parameters (Example for Oracle Solaris 11.3)
Parameter
Language
Locale
Terminal Type
Network?
Multiple Network Interfaces
DHCP?
Host Name
IP Address
Subnet?
Subnet Netmask
IPv6?
Security Policy
Confirm
Name Service
NFSv4 Domain Name
Time Zone (Continent)
Time Zone
(Country or Region)
Time Zone
Date and Time
root Password
6. Configure the logical domains.
The Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide
presents a logical domain configuration example in "Chapter 3 Operations for
Domain Configuration." For a detailed procedure, see the Oracle VM Server for
SPARC manual for the version used. For details on the functions provided only
108 Fujitsu SPARC M12-1 Installation Guide ･ June 2021
shows the Oracle Solaris parameters in the initial configuration settings.
Description
Select a language number from the displayed list of languages.
Select a locale number from the displayed list of locales.
Select the terminal type corresponding to the terminal device used.
Select "Yes."
Select the network interface that you intend to configure. If it is unclear,
select the first one on the list.
Select "Yes" or "No" according to the network environment used.
Enter the host name of the server.
Enter the IP address of this Ethernet interface.
Select "Yes" or "No" according to the network environment used.
If your answer for "Subnet?" was "Yes," enter the subnet mask of the
network environment used.
Specify whether to use IPv6. If it is unclear, select "No" to configure the
Ethernet interface for IPv4.
Select either the standard UNIX security (No) or Kerberos security (Yes).
If it is unclear, select "No."
Check the information on the screen, and change it as required.
Otherwise, continue on.
Select a name service according to the network environment used.
When a name service other than "None" is selected, a prompt appears and
requests input of configuration information for the added name service.
Select a domain name configuration type according to the environment
used. If it is unclear, select "Use the NFSv4 domain derived by the system."
Select the appropriate continent.
Select the appropriate country or region.
Select a time zone.
Accept the default date and time, or change the values.
Enter the root password twice. This password is used with a super-user
account in the Oracle Solaris OS on this server.