Buttons And Functions - Lennox RG10F2-MMA Manual

Buttons and Functions

The following is a brief overview of the remote controller. For instructions on how to
operate the unit, see "Basic Functions" on page 6 of this manual.
Turns the unit on or off.
TEMP
Increases temperature in 1°F (1°C)
increments. Max. temperature is 86°F
(30°C). Also used to set the Timer On/
Timer Off functions.
Scroll to locate
I SENSE ( ) function. Press the
OK button to confirm. Fresh
AP mode are not functional with
TEMP
Decreases temperature in 1°F (1°C)
increments. Max. temperature is
60°F (16°C). Also used to set the
Timer On/Timer Off functions.
FAN SPEED
Selects fan speeds in fthe
following order AUTO →
LOW → MED → HIGH.
TIMER ON
Sets timer to turn unit on
(see How to Use Basic
Function for instructions).
Not available.
ON/OFF
SET
and
this unit.
LED
Press to disable the button
functions of the controller.
Figure 2. Controller Buttons and Functions
LOCK
4
MODE
Scrolls through operation modes as
follows: AUTO → COOL → DRY →
HEAT → FAN.
SHORTCUT
Used to restore the current
settings or resume previous
settings.
OK
Used to confirm the
selected functions.
SWING
Not available.
TIMER OFF
Sets timer to turn unit off
(see How to Use Basic
Function for instructions).
°C/°F
The temperature display
between the °C & °F.
SLEEP
Saves energy during sleep
hours.