Table of Contents
Advertisement
EN
•
If the programmed boiler filling time (2 minutes) is exceeded, all beverage
buttons blink, and the coffee machine is not ready to be used. To revert it to the
operation readiness status, switch the coffee machine off and on again using the
main ON/OFF switch.
•
If the electronic control panel does not transmit a pulse from the flow meter (too
finely ground coffee for espresso or flow meter fault) within 5 seconds from the
pressing of one of the beverage buttons, the selected amount indicator light
starts blinking. Press the button again, to stop the blinking.
•
As an additional safety function the dispensing time for all amount settings is
limited to maximum of 5 minutes.
36 / 40
Have the appliance maintenance
performed
To de-activate the alarm and reset the
counter:
– Switch the appliance off.
– Press and hold at the same time the
and
button.
– Switch the appliance on.
Change filter.
To de-activate the alarm and reset the
counter:
– Switch the appliance off.
– Press and hold at the same time the
and
button.
– Switch the appliance on.
Possible Malfunctions
190160
Advertisement
Table of Contents
