Bartscher Coffeeline G1/6L Manual page 16

– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•
When in operation, the appliance may not be installed in a cabinet.
•
To obtain optimum efficiency the coffee machine should be installed in a
location, where the following values will not be exceeded:
– Maximum allowable water supply pressure: 600 kPa (6 bar)
– Minimum allowable water supply pressure: 200 kPa (2 bar)
– Maximum water supply temperature: 40ºC
– Ambient temperature in the range of +10ºC (min.) and +40ºC (max.).
•
Set the coffee machine on a level surface.
•
Set the feet so that during preparation espresso is distributed evenly into all
cups.
EN
Fig. 3
14 / 40
Installation and operation
•
The installation surface must be
located at least 110 cm over the floor
level.
•
Leave clearance over and behind the
appliance, so that sufficient space is
left for the purpose of maintenance and
cleaning.
•
To provide for sufficient air circulation,
leave a free space clearance of 30 cm
over the appliance and 10 cm behind
the appliance.
190160