Table of Contents
Advertisement
Installation and operation
4. When the milk reaches the required
temperature, close the steam tap
and remove the container.
Serving Hot Water
ATTENTION!
Risk of scalding by hot water!
When the appliance operates during hot water dispensing, under no
circumstance should you hold your hand or fingers under the outlet of hot water.
190160
5. When the process is finished, direct
the steam nozzle over the drip tray
and open the steam tap for a couple
of seconds to remove the milk left in
the steam nozzle.
Close the steam tap and use a
damp cloth to clean the steam
nozzle from the outside, so that it
does not get clogged.
1. Place a container under the
hot water tap, which is to be
used for dispensing hot water.
2. Keep the hot water tap open
until you dispense the right
amount of water.
3. Close the hot water tap again.
4. Check the drip tray regularly.
EN
Fig. 10
23 / 40
Advertisement
Table of Contents
