Table of Contents
Advertisement
Installation and operation
Fitting the handle on the brewing group head
Fig. 7
1. Set the handle so that their
both side guides are aligned
with slits in the brewing
group.
Fig. 9
Handle not fully
rotated in.
ATTENTION!
Be careful when fitting and removing the handle. Never use excessive
force to rotate the handle in.
190160
Fig. 8
2. Fit the handle and rotate it counter-
clockwise until it is set perpendicularly to the
coffee machine.
Correct position
Articulation of the brewing
group is used up and
needs replacement
EN
19 / 40
Advertisement
Table of Contents
