Table of Contents
Advertisement
Installation and operation
Coffee machine without display (190160)
– below 4 seconds: constant supply is activated (it is deactivated with
another button press);
– over 4 seconds: access to programming menu of coffee dispensing (see
below). The brewing process lasts as long as the user does not stop the
process through another button press.
Additional Button Functions
In order to activate these functions, use the main ON/OFF switch to switch the
coffee machine off and than on again, keeping pressed the selected beverage
button to the left.
1x espresso
1x coffee
2x espresso
NOTE!
In the case of a appliance with a display, it may be necessary to
activate/de-activate electronic pre-brewing function with the programming
menu.
Programming of the Dispensed Coffee Amount
This section contains a description of how to automatically set the dispensing
through pressing of beverage buttons.
ATTENTION!
For each newly programmed amount for dispensing use a handle filled
with fresh coffee.
1. In the case of an appliance without display, press and hold the
seconds, and in the case of an appliance with display — for 8 seconds.
The continuous operation
In an appliance with display, all beverage buttons are lit.
190160
Activation of electronic pre-brewing function
De-activation of electronic pre-brewing function
Execution of automatic cleaning
button starts to blink.
EN
button for 4
25 / 40
Advertisement
Table of Contents
