Bartscher Coffeeline G1/6L Manual page 28

2. Press the option to be programmed:
The pressed button and the
The brewing group starts to dispense espresso.
3. When a cup is filled up to the required level, press the selected button again to
stop dispensing.
This amount settings is stored.
In an appliance with display, the buttons, for which the dispensing amount is
programmed, go off.
4. Repeat the process for all dispensing options, which are to be programmed
anew.
If only one dispensing option is to be programmed anew, perform the above stops
and program only the required option.
All other dispensing options remain unchanged (standard settings).
NOTE!
Programming one option with the use of beverage buttons to the left (front
view) sets the dispensing amount automatically for all other beverage
buttons. This is the case only for beverage buttons to the left.
EN
Programming other beverage buttons introduces changes only for a
selected option.
Coffee Machine Status
The coffee machine with display is equipped with the following additional functions:
•
Timer for daily automatic switching on/off (standby mode)
•
Time setting (hour and date)
•
Advertising display
•
Number of dispensed espresso cups / beverages
•
Digital boiler temperature control and display
•
PID controller for boiler temperature control
•
Assistance in programming and setting
•
Warning indicator pertaining to water softener
•
Display language selection (4 languages available)
26 / 40
, ,
button are still being lit.
Installation and operation
or .
190160