Original instruction manual Safety ......................2 Explanation of Signal Words ..............2 Safety instructions..................3 Intended Use ................... 5 Unintended Use ..................6 General information ..................6 Liability and Warranty ................6 Copyright Protection ................7 Declaration of Conformity ................ 7 Transport, Packaging and Storage ..............
Safety Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Infor mationsquelle und N achschl agewer k. Di e Kenntnis aller enthaltenen Sic herheits hi nweis e und H andlungs anweisungen schafft die Vorauss etz ung für das sichere und s ac hger echte Ar beiten mit dem Gerät. D arüber hi naus müs sen die für den Ei ns atz ber eic h des Geräts geltenden ör tlichen Unfall verhütungs vorsc hriften und allgemeinen Sicherheits besti mmungen eing ehalten wer den. Dies e Bedi enungs anleitung is t Bes tandteil des Produkts und muss i n unmi ttelbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritte Pers on weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Safety WARNING! The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided. CAUTION! The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided. , di e IMPORTANT! The signal word IMPORTANT indicates possible property damages,...
Page 6
Safety • Always completely unwind the power cord. • Never place the appliance or other objects on the power cord. • Always take hold of the plug to disconnect the appliance from the power supply. Flammable Materials • Never subject the appliance to contact with high temperature sources, e.g.: oven, furnace, open flame, heat generating devices, etc.
Safety Health hazard due to germs! • The water tank must be regularly emptied and disinfected to eliminate the possibility of accumulation of harmful and dangerous germs. Supervised Usage only • Only supervised appliance may be used. • Always remain in an immediate vicinity of the appliance. Operating Personnel •...
General information Unintended Use An unintended use may lead to personal injuries or property damages caused by hazardous voltage, fire or high temperature. The appliance may only be used to perform tasks described in this instruction manual. General information Liability and Warranty All information and instructions in this instruction manual account for legal regulations in force, current level of technical engineering knowledge as well as our expertise and experience, developed over the years.
General information Copyright Protection This instruction manual, and texts, drawings and images included in it, as well as its other components are copyright protected. It is prohibited to reproduce this instruction manual (including its excerpts), in any form and by any means, and to use and/or transfer its content to third parties without manufacturer’s written permission.
Transport, Packaging and Storage Transport, Packaging and Storage Delivery Check Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint.
Technical Data Technical Data Technical Specifications Automatic coffee machine KV1 Name: Classic 190052 Item No.: Material: Plastic Grinder material: Steel Number of brewing unit groups: Water tank volume, in l: Coffee container volume, in g: 1.000 Programs: Pump pressure, in bar: Outlet, height regulation, 100 - 160 from –...
Page 12
Technical Data Version / Characteristics • Fully automatic • Control: electronic • Descaling signal • Fill level indicator • ON/OFF switch • Indicator light: ON/OFF • Settable parameters: grinding coarseness with 5-level scale, coffee dosing, amount of water, water temperature •...
Auxiliary equipment (not included in the delivery!) Description Art. no.: KV1 dregs container with 190060 discharge opening Designed for Bartscher KV1 Classic and KV1 Comfort automatic coffee machines Disposing of dregs directly into a waste bin Material: plastic Dimensions: W 80 x D 155 x H 160 Weight: 0.09 kg...
Installation and operation Installation and operation Installation Unpacking / Positioning • Unpack the appliance, remove all external and internal packaging elements and shipment safeguards. CAUTION! Choking hazard! Prevent children from accessing package materials, for instance: plastic bags and EPS. • If the appliance is covered with a protective film, remove it.
Page 17
Installation and operation Power supply connection • Verify if technical data of the appliance (see rating plate) correspond with the local electric power grid specification. • Connect the appliance to a single, properly grounded mains socket with protective contact. Do not connect the appliance to a multi-socket. •...
Page 18
Installation and operation To supply the appliance from water mains system, perform the following steps: Step 1: Connecting the water hose 1. Connect one end of the delivered water supply hose (with 1/4" thread) to the water connection stub at the back face of the appliance, and the second end (with 1/2"...
Installation and operation Operation Important indications • Fill the water tank solely with fresh potable water. • Never fill the water tank with warm/hot water, milk nor any other liquid. • Never fill the coffee container (ground coffee container) any instant coffee, cocoa nor any other powder mixtures.
Page 20
Installation and operation Appliance start-up 1. Plug the appliance into a suitable single socket. 2. Set the mains switch at the back of the appliance to 'I'. 3. Press the ON/OFF switch at the left side of the control panel to activate the appliance.
Page 21
Installation and operation Language setting 1. If needed, set the language. 2. Press and hold the 'Menu / OK' button for 3 seconds to move to the program menu. 3. In the program menu, use '∧' and '∨' 4. Use '∧' and '∨' setting buttons, and setting buttons, and keep pressing keep pressing them to select them to select 'Machine' option and...
Page 22
Installation and operation Water hardness setting 1. Press the 'MENU / OK' button and 2. Use '∧' and '∨' setting buttons, and hold it for 3 seconds, and with the keep pressing them to select 'Water '∧ ' and '∨ ' setting buttons select the hardness' option and use 'MENU / 'Machine' option.
Page 23
Installation and operation 3. If during preparation the coffee flows very slowly or does not flow out completely, set the grinding coarseness to 4 or 5. 4. If the ground coffee is dark, we recom- mend higher coarseness settings: 4 or 5. The changes to the grinding coarseness will only be noticeable after 2 or more fresh cups of coffee are brewed.
Page 24
Installation and operation Appliance parameters settings 1. Press the 'MENU / OK' button and hold it for 3 seconds, and with the '∧' and '∨' setting buttons select the 'Beverage' option. 2. Confirm the selection with 'MENU / OK' button. 3.
Page 25
Installation and operation Preparation of Cappuccino / Coffee Latte / Macchiato 1. Connect firmly the milk hose with the milk frother and the milk container. 2. Place a cup under the coffee outlet and press, for example, the 'CAPPUCCINO' symbol to prepare the selected beverage. When the 'Beverage ready' message is displayed, it means that cappuccino is ready.
Page 26
Installation and operation Preparing beverages with ground coffee function The coffee machine is equipped with a function that makes it possible to prepare coffee with the use of ground coffee. NOTE: To prepare coffee with the ground coffee function, the amount of the ground coffee used must be 5 - 14 g.
Cleaning and Descaling 6. Select the beverage by pressing the button with the required symbol. Cleaning and Descaling Safety Instructions for Cleaning • Before cleaning, disconnect the appliance from the power supply. • Leave the appliance to cool down completely. •...
Page 28
Cleaning and Descaling Rinsing of the brewing unit 1. Press and hold the 'MENU / OK' The rinsing of the brewing unit lasts for button for 3 seconds. approx. 30 seconds. 2. Use '∧' and '∨' setting buttons, and keep pressing them to select 'Rinse brew unit' option and use 'MENU / OK' button to confirm the selection.
Page 29
Cleaning and Descaling Cleaning the brewing unit After a longer period of use, some ground coffee will build up in the brewing unit. Remove the remaining ground coffee, cleaning the brewing unit thoroughly. Use the right cleaning tablets to clean the brewing unit. The cleaning process of the brewing unit lasts approx.
Page 30
Cleaning and Descaling 5. Reinsert the drip tray in the 6. Press the 'MENU / OK' button to appliance. continue. The 'Pre-cleaning' message will appear 7. Open the grinder cover and insert on the display. cleaning tablets. 8. Close the cover and press 'MENU / OK' button to confirm.
Page 31
Cleaning and Descaling The brewing unit cleaning process is 9. Remove the drip tray and empty it. executed. 10. Reinsert the drip tray in the The brewing unit cleaning process is appliance. finished. The appliance is re-heated. When the brewing unit cleaning process is finished and the appliance is re- heated, it switches to the 'Ready' mode.
Page 32
Cleaning and Descaling Cleaning the milk system 1. In a separate container, prepare a solution of water and commercially available cleaning agent for milk systems/milk frothers. Observe indications on the packaging of the agent. 2. Remove the milk hose from the water container or from the milk hose opening in the drip grate and introduce it to the container with milk system cleaning agent solution.
Page 33
Cleaning and Descaling 8. The milk system cleaning is 9. Fill the container with fresh potable executed. water and press the 'MENU / OK' button to continue rinsing. The milk system is rinsed. The milk system cleaning is finished. 10. Remove the milk hose from the rinse water container and introduce it into the opening in the drip grate.
Page 34
Cleaning and Descaling Cleaning the milk frother 1. The milk frother should be cleaned 3. Remove the milk hose from the milk daily. frother. 2. Press it simultaneously at both sides and carefully remove from the appliance. 4. Disassemble the milk frother as 5.
Page 35
Cleaning and Descaling 6. Wash the milk hose carefully under running water, allowing water to run also through the milk hose. 7. Reassemble the milk frother and reinstall it in the appliance. 8. Secure the milk hose on the milk frother.
Page 36
Cleaning and Descaling 2. Clean the metal filter manually, using a soft cloth or a soft brush and inserting it carefully through the front opening. 3. When the filter is clean, reinsert the drip tray and the dregs container into the appliance.
Page 37
Cleaning and Descaling Cleaning the water tank 1. Remove the water tank. 2. Wash the water tank thoroughly each time it is filled with water. 3. Then, fill the water tank with fresh potable water and reinstall it in the appliance.
Cleaning and Descaling Descaling In the course of daily use of the appliance, depending on the local water hardness, limescale may build up inside the appliance components. In order to maintain the appliance in top condition, and in order to be certain that every brewing process yields the best results, the appliance should be descaled from time to time.
Page 39
Cleaning and Descaling 7. Remove the drip tray and empty it. 8. Reinsert the drip tray in the appliance. 9. Remove the milk hose from the drip 10. Dissolve the descaling agent grate. Press the 'MENU / OK' button completely in 1,000 ml of clean to commence descaling.
Page 40
Cleaning and Descaling 12. Reinsert the drip tray in the 13. Remove the water tank and clean it appliance. thoroughly. 14. Fill the water tank with fresh potable water and reinstall it in the appliance. 15. Press the 'MENU / OK' button to The descaling is continued.
Page 41
Cleaning and Descaling • When emptying the water s uppl y hose, hot water may flow from the coffee outl et onto the dri p tr ay. Avoid contac t with the outflowi ng hot water; ther e is the ris k of sc aldi ng . Transporting the appliance 1.
Page 42
Cleaning and Descaling 8. Press the 'MENU / OK' button. The water system is emptied. Then, the appliance begins automatically to clean the water supply hose. After the water system is emptied, the appliance switches off automatically. 9. After it switches off, remove the drip tray, and then empty and clean it. 10.
Possible Malfunctions Possible Malfunctions Mögliche The table below contains descriptions of possible causes and solutions to malfunctions or errors during operation of the appliance. When malfunction cannot be removed, contact the technical service. Display Message Cause Solution Empty the drip tray The drip tray is full, and the Remove the drip tray, empty beverage preparation...
Disposal Display Message Cause Solution Error codes 1–7 Errors cannot be defined Switch the appliance off and switch it back on If the problem persists, pull the plug out and contact the service company High pressure The used coffee beans are Set the coarser grinding too dark or the coffee is level of 4–5 or use a...