Bartscher Contessa 1002 Manual
Hide thumbs Also See for Contessa 1002:

Advertisement

Quick Links

„Contessa 1002"
A190043
Original-Gebrauchsanleitung
V9/0616

Advertisement

Table of Contents
loading

Summary of Contents for Bartscher Contessa 1002

  • Page 1 „Contessa 1002“ A190043 Original-Gebrauchsanleitung V9/0616...
  • Page 2 215 mm 390 mm...
  • Page 4: Table Of Contents

    5. Installation and operation ..................29 5.1 Installation ......................29 5.2 Operation ......................30 6. Cleaning and descaling ..................32 7. Possible Malfunctions .................... 35 8. Waste disposal ......................36 Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...
  • Page 5: Safety

    Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
  • Page 6 • This device may only be operated in technically proper and safe condition. • Prevent access of children to the package materials like plastic bags and foamed polystyrene elements. Suffocation hazard! • Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device.
  • Page 7 • The supply cable must be disconnected from the socket only by pulling the plug. • Never carry or lift the device by the supply cable. • In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur.
  • Page 8: Key To Symbols

    WARNING! Risk of scalding with steam and hot water! To avoid the hazard results please follow the safety instructions below. • During the brewing process a small amount of hot steam is produced. To avoid burns, be careful when removing the thermos jug from the lower plate.
  • Page 9: Proper Use

    HOT SURFACE! This symbol is a warning that the device surface is hot when in use. Ignoring this warning may result in burns! CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation.
  • Page 10: General Information

    2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
  • Page 11: Transport, Packaging And Storage

    3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
  • Page 12: Technical Data

    4. Technical data 4.1 Technical specification Description Coffee machine „Contessa 1002“ A190043 Code-No.: Model: Chrome nickel steel Connection power: 2.0 kW / 230 V 50 Hz Brewing time: approx. 8 minutes per thermo jug Min. brewing quantity: 0.5 litre Hourly capacity:...
  • Page 13: Overview Of Parts

    4.2 Overview of parts NOTE! The cover flap contains the coffee machine most important parts. While reading the instructions this page should always be open and visible. Upper hotplate Cover flap for filling in cold water Control lamp red (status indicator) Main ON/OFF switch ON/OFF switch for upper heating plate Filter basket...
  • Page 14: Installation And Operation

    5. Installation and operation 5.1 Installation Positioning • Unpack the device and remove all packing material. CAUTION! Never remove the rating plate and any warning signs from the device. • Place the device on top of an even, stable, dry, and water-resistant surface which supports the weight of the device and is not heat sensitive.
  • Page 15: Operation

    5.2 Operation Prior to first use CAUTION! Never fill hot water into the cold water tank. Do not fill water into the hot device; wait until it has cooled down. • Prior to first use it is necessary to run 2 or 3 cycles of water through the machine without coffee, in order to properly rinse the device („Preparation of coffee“...
  • Page 16 Preparation of coffee 1. Remove the filter basket (6) and place the proper Bartscher paper filter (Code-No.: 190014 or 1900015250) inside. 2. Pour a proper amount of ground coffee into the paper filter. Use 35 to 50 g of coffee per one litre of water, in accordance with your preferences.
  • Page 17: Cleaning And Descaling

    6. Cleaning and descaling WARNING! Disconnect the device from the power supply (unplug!) before cleaning. The device is not designed to be rinsed with running water. Do not use a pressure washer to clean the device! Be careful and do not let the water into the device. Regular cleaning CAUTION! Always, prior to cleaning, moving or transporting the machine,...
  • Page 18 (e.g. in case of very hard water). o For removal of calcium deposits we recommend „Bartscher Fast descaler for coffee machines“ a formula tried and tested by us: (Code-No.: 190065;...
  • Page 19 o After finishing the deposit removal process it is necessary to repeat the brewing process 2-3 times using only water, in accordance with the instructions contained in this insert and/or instructions for use. Water remaining in the coffee machine must then be removed with the help of the flow valve located on the rear wall (at the bottom) of the device.
  • Page 20: Possible Malfunctions

    7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. PROBLEM CAUSE REMEDY •...
  • Page 21: Waste Disposal

    CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...

This manual is also suitable for:

A190043

Table of Contents