Table of Contents
Advertisement
Installation and operation
5. Put one or two cups under the
outlet valves.
ATTENTION!
Scalding or serious injuries caused by high-pressure hot water.
Never remove the handle during the brewing process.
When the brewing process is complete, wait for approx. 3 seconds before
removing the handle.
Heating up / Frothing Milk
190160
6. Select appropriate option using
beverage buttons.
1. Set the steam nozzle over the drip tray
and open the steam tap for a couple of
seconds, to drain the water
condensate.
When only steam starts to escape,
close the steam tap again.
EN
21 / 40
Advertisement
Table of Contents
