Advertisement
2. Intended Use
This product is an electrically powered model helicopter which is radio controlled with the remote control unit included
in the delivery. The model is designed for operation indoor and can be used outdoor only by totally calm conditions.
The model helicopter is pre-assembled and ready to fly and is delivered with built-in remote control and drive compo-
nents.
The product must not become damp or wet.
The product is not a toy and should be kept out of reach of children under 14 years of age.
Observe all safety notes in these operating instructions. They contain important information regarding the
handling of the product.
3. Product Description
The ready-to-fly indoor helicopter „Rex-X-Micro" has a rotor head, for which the angle of incidence is fixed for both
rotor blades and cannot be adjusted. The raising and lowering of the helicopter is accomplished solely by changing the
speed of the main rotor.
The swash plate with a 90° hinge is controlled by 2 servos. Deliberately inclining and tilting the swash plate causes a
constantly repeating direction-dependent (cyclic) adjustment of the blades which enables flight in a particular direc-
tion.
Stabilization around the vertical axis is handled by a tail rotor which is powered by a separate electric motor. The
central electronics component consists of a high-quality receiver, a mixer and a gyro. The two speed controls for the
electro motors are built as external components. The 2.4 GHz radio remote control installation included in the delivery
allows a sensitive steering of the model.
8 Mignon batteries (e.g. set of 4 batteries, Conrad Item-No. 652507) or rechargeable Mignon batteries are required to
operate the transmitter.
42
16.
Caractéristiques techniques
Emetteur
Plage de fréquences .......................................................... 2,4 GHz
Nombre de canaux ............................................................. 4
Alimentation électrique 8 piles Mignon/accus .................... 9,6 – 12 V/DC
Dimensions (L x l x H) ........................................................ 190 x 240 x 95 mm
Poids avec piles ................................................................. 810 g
Hélicoptère
Alimentation électrique par accu LiPo ............................... 3,7 V/500 mAh
Diamètre du rotor principal ................................................. 201 mm
Diamètre du rotor arrière .................................................... 49 mm
Longueur du fuselage ........................................................ 216 mm
Poids, accumulateur compris ............................................. 66 g
Chargeur
Tension de service .............................................................. 230 V/CA, 50 Hz
Sortie .................................................................................. 4,2 V/CC, 500 mA
17.
Déclaration de conformité (DOC)
Le fabricant déclare par la présente que le présent produit est conforme aux exigences fondamentales et aux
autres prescriptions importantes de la directive 1999/5/CE.
La déclaration de conformité de ce produit peut être consultée à l'adresse www.conrad.com.
115
Advertisement
Chapters
