Before Using The Vacuum Packing Machine; Command Panel: Idea 30 - Idea 40 - Idea 31 - Idea 41; Functions And Warnings; Maximum Admissible Values - Orved IDEA 30 User And Maintenance Manual

5 BEFORE USING THE VACUUM PACKING MACHINE

• Before using the machine, the vacuum chamber and lid must be cleaned using a clean, soft cloth soaked
in potable water.
• It is recommended not to use aggressive detergents, stainless steel scrubbers, scrapers or abrasive, acidic
or aggressive substances, which may permanently damage the internal surfaces of the vacuum
chamber.
6 Command panel: Idea 30 – idea 40 – idea 31 – idea 41
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 10 a 76
N° DESCRIPTION
 Pressed contemporarily with STOP for 4", displays the number of vacuum cycles operated
1
 Pressed contemporarily with STOP at turning on, allows to activate or deactivate the acoustic signal
Allows to set the vacuum level, the additional vacuum, Gas (only on IDEA31 - IDEA41)

2
If pressed after reaching the 90% of vacuum, it allows to anticipate the GAS injection

Scroll down the programs

3
Change the parameters values

4
 Pressed contemporarily for 4", allow the saved program reset, restoring the factory values.
Allows to set the sealing time

5
Pressed during the vacuum cycle, allows to anticipate the sealing

 stand-by/on and on/stand-by (pressed for 5")
Pressed contemporarily with PLAY/PAUSE for 4" displays the number of vacuum cycles operated

6 Pressed contemporarily with PLAY/PAUSE at turning on, allows to activate or deactivate the acoustic

signal
 Interrupts the current vacuum cycle
7  Displays the current function
 Displays the active program
 Displays the active function and the set value
8
Displays any alarm

Displays the vacuum cycles operated before the oil change

9 If ON, indicates that the GAS function is active


6.1 Functions and warnings

6.1.1 Maximum admissible values

FUNCTION
VACUUM
ADDITIONAL VACUUM
SEALING
GAS ( IDEA31 - IDEA41)
CAUTION!
It is necessary to carry out preliminary tests, to identify the optimal percentage of GAS to be
injected, for every single product to be packed.

6.1.2 Factory configuration

FUNCTION
VACUUM
ADDITIONAL VACUUM
SEALING
GAS (
IDEA31 - IDEA41)
6.1.3 Activate / deactivate the acoustic signal
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
VALORE
10% – 99%
1 – 60 sec
0,1 – 6,0 sec
1 – 90%
VALORE
99
5 sec
2,5 sec
OFF
( per idea 30 – 40 - Idea 31 – 41)
IDEA vacuum packing machines Pag. 11 a 76