Orved IDEA 30 User And Maintenance Manual page 18

6 Select User Cycles
7 Select the desired program, choosing between the editable and preset programs available.
In case of an editable cycle, press SETTINGS.
8a
Press +/- buttons, to set a vacuum level from
10% to 99%
8a.1
Any vacuum level lower than the maximum,
reduces or cancel the preservation effect,
due to the residual air remained in the bag.
Press +/- buttons, to set an additional vacuum
8a.2
time from 1" to 60"
Press +/- buttons, to set a GAS level from 1%
to 90%
8a.3
When the GAS function is active, make sure
that the vacuum level set is 99%.
Press +/- buttons, to set a sealing time from 0"
8a.4
to 6"
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
PROGRAM 1
PROGRAM 1
PROGRAM 1
PROGRAM 1
PROGRAM 1
IDEA vacuum packing machines Pag. 34 a 76
Press +/- buttons, to set a softair time from 0"
8a.5
to 30"
8a.6 Name the program
Press OK to save the set parameters and
8a.7
come back to the previous screen
If one of the preset cycles
Vacuum in bag preserving
Vacuum in bag cooking
8b is used (Example: Vacuum
preserving), only the parameter sealing time
can be edited.
If one of the preset cycles
Vacuum + GAS MIN
Vacuum + GAS MED
Vacuum + GAS MAX
(Example: Vacuum + GAS MED), all the
8c
parameters can be edited, but it is necessary
to make a copy of the program, to save the
new settings.
Lower the lid using both hands, by pressing
on the corners.
9
The vacuum cycle starts automatically.
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
PROGRAM 1
PROGRAM 1
Vacuum in bags preserving
in bag
Vacuum in BAG GAS MED
IDEA vacuum packing machines Pag. 35 a 76