Degas Cycles - Progressive Vacuum Cycle; Parameter Settings; Single Step Parameter Settings - Orved IDEA 30 User And Maintenance Manual

Pressing STOP button at any time, it is possible
to interrupt the vacuum cycle immediately
and the vacuum chamber is uncompressed.
10
The lid opens automatically.
The machine comes back to the selected
program.
End of cycle. The lid opens automatically.
11
Remove the packed products, paying attention not to touch the sealing bar, as it may be still hot
9.4 Degas cycles – progressive vacuum cycles
N° Description
1 Cycle name: from DEGAS 1 to DEGAS 5
2 Set value
Enter the sealing time setting menu
3
Anticipate the sealing
4 Phase progress display bar
5 Enter the single step setting menu (vacuum and pause)
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
Marinade in bags
IDEA vacuum packing machines Pag. 42 a 76

9.4.1 Parameter settings

N° Description
Allows to activate the step (button becomes white) and to
1
enter the vacuum setting menu and step pause
2 Allow to switch from step 1 to 8 and vice versa
3 Set value
Allows to modify the sealing time
4
5 Allows to enter the sealing time setting menu

9.4.2 Single step parameter settings

_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 43 a 76