Command Panel Idea 32 Hi-Line - Idea 42 Hi-Line; Vacuum Machine First Use - Orved IDEA 30 User And Maintenance Manual

Using a bag, press SEAL button to set the
8a sealing time between 0,1" and
depending to the vacuum bag in use.
Using a container, press SEAL button to set the
8b
sealing time to 0".
Lower the lid using both hands, by pressing on
the corners.
9
The vacuum cycle starts automatically.
Press PLAY/PAUSE button, to pause the
vacuum phase (to flat the bubbles appeared
into the bag and avoid any product
overflowing) and press it again, to have a
partial air re-entering and start a new
11
vacuum phase. Multiple time, to achieve
Th operation can be repeated multiple time,
to obtain – step by step – the vacuum level
programmed.
Press SEAL button to switch in advance to
12a
sealing.
Pressing STOP button at any time, it is possible
to interrupt the vacuum cycle immediately
13 and the vacuum chamber is uncompressed.
The lid opens automatically. The machine
comes back to the selected program.
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
6,0",
IDEA vacuum packing machines
End of cycle. The lid opens automatically.
14a
Remove the packed products, paying attention not to touch the sealing bar, as it may be still hot
14b End of cycle. The lid opens automatically.
8 Command panel IDEA 32 Hi-Line – IDEA 42 Hi-Line
N° DESCRIPTION
1 User Cycles: completely editable
2 Chef Cycles: special vacuum cycles for special processing
3 Degas Cycles
4 Jar Cycles
5 Shows information about the screen (if available)
6 Gives the access to Technical menu
7 Helps to stop the machine

8.1 vacuum machine first use

When first starting up the machine, proceed as described below: Access to technical menu (indicated by
number
Technical Menu
USER MENU
SERVICE MENU
_______________________________________________________________________________________
Pag. 24 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
Remove the container.
6 in previous
Machine Infos
Settings
H
WI-FI Settings
IDEA vacuum packing machines
page image).
Out Cycle
2
User Menu
Pag. 25 a 76