Jar Cycles; Editable Jar Cycle; Parameter Settings - Orved IDEA 30 User And Maintenance Manual

Press the icon corresponding to the step, to
enter the setting screen and edit the
parameter values.
8 Press + / - buttons to set the SEALING TIME from
0" to 6,0".
Press OK to save the new set values and
come back to the previous screen.
Press +/- buttons, to set a vacuum level from
10% to 99%
Press +/- buttons, to set a STEP PAUSE TIME
9
from 0" to 60".
Set the Softair air return time
To deactivate a step: press the button
corresponding to the step to be deactivated
10 (it will change from white to black) and press
OK to save the changes and come back to
the previous screen.
Lower the lid using both hands, by pressing on
the corners.
11
The vacuum cycle starts automatically.
Pressing STOP button at any time, it is possible
to interrupt the vacuum cycle immediately
and the vacuum chamber is uncompressed.
12
The lid opens automatically.
The machine comes back to the selected
program.
End of cycle. The lid opens automatically.
13a
Remove the packed products, paying attention not to touch the sealing bar, as it may be still hot
13b End of cycle. The lid opens automatically. Remove the container.
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 46 a 76

9.5 Jar cycles

9.5.1 Editable jar cycle

N° Description
1 Program name
2 Instant value in the cycle
3 Set value

9.5.2 Parameter settings

JARS CYCLE
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
N° Description
1 Editable JAR Cycle
2 Preset JAR Cycles
JARS CYCLE
JARS CYCLE
IDEA vacuum packing machines Pag. 47 a 76