Handling
4.4.3
Notes on the lubricant used
Lubricant used
All gear units are lubricated for life at the factory. The lubricant used is a grease.
4.4.4
Notes on the adhesive
Inserted adhesive
The sun wheel of the gear unit is factory glued to the motor shaft of the AS1000 series. The em-
ployed Adhesives WEICONLOCK AN 306-48 (D) and WEICONLOCK AN 306-60 (D) are anaerobic
Sealants. These include dangerous ingredients such as:
• acrylic acid (<3%)
• methacrylic acid (> 10%)
• 2-hydroxyethyl methacrylate (<20%)
• cumene hydroperoxide (1%) and
• methacrylic acid ester (<20%)
Further information on the adhesives is available directly from the manufacturer:
4.5
Disposal
National regulations
Observe the relevant national disposal regulations.
Supplementary information on replacing the adapter plate and disassembly and disposal of the gear unit is
available from our service department:
• The device should be disposed of by a certified disposal company. Addresses can be obtained from
our service department.
• Metal parts can be sent for metal recycling.
In accordance with the WEEE 2012/96/EG Directives we take old devices and accessories back for
professional disposal, provided the transport costs are taken over by the sender.
Send the devices with the note "For disposal" to:
Beckhoff Automation GmbH & Co. KG
Huelshorstweg 20
D-33415 Verl
14
Adhesive WEICONLOCK AN306-48 / 60 (D)
WEICON GmbH & Co. KG, Königsberger Str. 255
D-48045 Münster
Tel.: +49 (0)251 / 93 22-0
www.weicon.com
Version: 1.4
AG1000