Ethernet Connection; Table 4-5. Ethernet Cable Pin-Outs - ADTRAN Total Access 300 Series Installation And Maintenance Manual

Total Access 300 Series Single Family Unit ONT Installation and Maintenance Guide

Ethernet Connection

When supporting up to two ethernet connections (10/100/1000), use a CAT-5 rated cable.
To connect Ethernet, complete the following steps:
1. Route the Subscriber Ethernet wires as shown in
2. Strip back the jacket of the subscriber Ethernet cable and connect the 4 pair twisted wires
Pin
1
2
3
4
5
6
7
8
3. Insert the RJ-45 connectors for each line.
4. Secure each Ethernet cable to the Tie Wrap Point.
4-16
to the RJ-45 Plug using a RJ-45 crimper. Refer to
Cable Pin-Outs.

Table 4-5. Ethernet Cable Pin-Outs

Name
TRD0+
TRD0-
TRD1+
TRD2+
TRD2-
TRD1-
TRD3+
TRD3-
Figure 4-9
Table 4-5
Description
Transmit/Receive Positive
Transmit/Receive Negative
Transmit/Receive Positive
Transmit/Receive Positive
Transmit/Receive Negative
Transmit/Receive Negative
Transmit/Receive Positive
Transmit/Receive Negative
on page 4-17.
for a list of Ethernet RJ-45
Color Code
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
612877GONT-5C