General Information; Introduction - Accurate Technology ProScale 950 Series Operation

S 1
ECTION

Introduction

This manual includes installation and Operation for ProScale LCD
Readouts with operating firmware (F/W) of 3.100 or higher. These readouts
may be included as part of a ProScale measuring system or other product such
as ProTable or ProPanel.
This manual DOES NOT include installation for other Readouts, or ProScale
systems. Please refer to the appropriate
A typical ProScale measuring system consists of three major parts:
•
– an aluminum extrusion to which a printed circuit board with a
SCALE
unique pattern is bonded.
•
ENCODER
a position or distance from some arbitrary point of origin.
•
DIGITAL READOUT
measurement or position information sent by the
The Readouts covered in this Manual are compatible with these SCALES:
ProScale Models 150,
these systems), incorporate
any of several Digital Readouts including some not covered in this manual.
ProScale Models 180, 280,
systems), incorporate Inductive Series I technology and may include any of
several Digital Readouts including some not covered in this manual.
ProScale Models 190, 290,
systems), incorporate
several Digital Readouts including some not covered in this manual.
Manual Part # 800-1402-002 Rev K, 072418
– a readhead or sensor that traverses the
– or DRO, is the component that displays the
250 & 950
Absolute
380 &
390 &
Inductive Series II
If your Scale looks like this (Model 100, 200):
These Readouts are NOT COMPATIBLE!
G
ENERAL
Installation manual
series systems, (and products based on
measuring technology and may include
580 systems, (and products based on these
590 systems, (and products based on these
technology and may include any of
I
NFORMATION
Digital
for your system.
to determine
SCALE
.
ENCODER
Page 7 of 53