Plus (+) & Minus (-) Keys; Datum Key - Accurate Technology ProScale 950 Series Operation

Plus (+) & Minus (–) Keys
Momentarily pressing the
displayed value by one unit of measurement. (in, mm, cm or 1/64)
Press & Hold the
displayed value. The longer the key is pressed, the faster the changes occur.
–
+
The & keys may be locked out to prevent accidental entries by using
and/or
key lock

Datum Key

Momentarily pressing the
value. This can be zero or any other displayable value.
Set the key programmed value with
DATUM
Press and Hold the
Press and Hold the
The temperature is displayed in "F" or "C" based on the current units setting
(Inch or Metric).
The key may be locked out to prevent accidental entries by using
DATUM
and/or
key lock
Operation Manual for LCD Digital Readouts
+
or
–
+
or key to continue to increment or decrement the
Programming Parameter (Pr3).
DATUM
key for 6 seconds to display the battery voltage.
DATUM
key for 9 seconds to display the temperature.
DATUM
Programming Parameter (Pr3).
Momentarily Press or Press & Hold
–
key will increment or decrement the current
Momentarily Press or Press & Hold
key forces the Readout to a user programmed
Parameter (Pr1).
Page 18 of 53