Battery Operation
When the Readout battery needs to be replaced, the battery icon will
appear in the lower left corner of the LCD. Press and hold the
DATUM
key for 6 seconds to display the Battery Voltage.
When battery voltage drops below 2.6v, the Readout will turn itself off until the
battery is
replaced.
Basic , 950, General Purpose,
Remove the screws in the upper right and lower left corners. Pull the cover off.
Remove the old battery(ies). Install a new CR123 or equivalent battery noting
the proper orientation. Replace the cover and screws.
–
+
In-Panel Readout
Remove the screws holding the back cover in place. Pull the cover off.
Remove the old battery. Reinstall a new CR123 or equivalent battery noting
the proper orientation. Replace the cover and screws.
–
+
Manual Part # 800-1402-002 Rev K, 072418
Page 13 of 53