Operation; Initial Set-Up - Accurate Technology ProScale 950 Series Operation

S 3 O
ECTION PERATION

Initial Set-up

In most instances it will be desirable to set some initial parameters such as a
reference point, measurement units and resolution for your measuring
application.
Measurement Units
The measurement units that are displayed (inch, mm, cm) are
selected with the UNITS Key.
Current Position
The ProScale Readout allows the current position to be
easily configured, using the +, - and (optionally) DATUM
Key.
Reference Point
The ProScale Readout allows a reference point (zero or other value)
to be easily recalled using the DATUM Key. The value of this
reference point is programmed in Programming Parameter Pr1.
Reading Direction
The direction of the reading as the measurement system is moved is
programmed using Programming Parameter Pr2.
Resolution
The resolution of the displayed units is programmed using Programming
Parameter Pr4.
Additional Initial Set-up items MAY include:
Auto On/Off
Key Lock
Scaling
Manual Part # 800-1402-002 Rev K, 072418 Page 15 of 53