X 2607 Diagonal 1-1/4 X 3 X 22" 2 X; H10 - KidKraft TREASURE COVE Installation And Operating Instructions Manual

Step 4: Frame Assembly
Part 3
C: Loosely attach 1 (2607) Diagonal to left (2778) SW Ground MOD with 1 (H10) 1/4 x 2-1/4" Hex Bolt (with lock
washer, flat washer and t-nut). (fig. 4.5)
D: Place each (2607) Diagonal tight and flush to the front of the Swing Wall then pre-drill pilot holes with a 3/16"
drill bit and attach each (2607) Diagonal to the Swing Wall with 1 (LS3) 1/4 x 3" Lag Screw (with flat washer) per
board, checking that they remain flush to outside edge. (fig. 4.5 and 4.6)
Flush
Fig. 4.5
2607
TN1
(hidden)
LW1

H10

FW1
Fig. 4.6
FW1
LS3
2607
Wood Parts
1 x Diagonal 1/1/4 x 3 x 22"
2607
Swing Wall
2778
1 x H10
2 x
LS3
Swing Wall
Hardware
1/4 x 2-1/4" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
1/4 x 3" Lag Screw (1/4" flat washer)
24
Flush
2607
LS3
FW1
2607